Dell XPS 600 Removing the Processor Airflow Shroud, 112, Anchor tabs Shroud release levers

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

11Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 58).

Processor Airflow Shroud

CAUTION: Before you perform this procedure, follow the safety instructions located in the Product Information Guide.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

NOTICE: To avoid damaging the fan power cables, do not slide the shroud too quickly.

Removing the Processor Airflow Shroud

1Follow the procedures in "Before You Begin" on page 69.

2Press the two shroud release levers and lift the shroud up to disengage the anchors.

3Once the shroud has been disengaged from the anchors, unplug the fan cables from their connectors on the system board by pressing the release tabs on the fan cable connectors while pulling up.

anchor tabs (3)

shroud release levers (2)

112

Removing and Installing Parts