JVC LVT0900-008A manual About MD indicator, On the main unit only To prohibit disc ejection

To go to another track

Press ¢ or 4 repeatedly.

•¢: Skips to the beginning of the next or succeeding tracks.

•4: Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons

On the remote control ONLY:

Pressing the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

About MD indicator

An MD is	During	During
loaded	playback	pause

To prohibit disc ejection—Disc Lock

You can prohibit disc and MD ejection from the unit and can lock discs.

On the main unit ONLY:

To prohibit disc ejection

Press REV.MODE while holding 7 when the unit is in standby mode.

“LOCKED” appears in the main display for a while, and the loaded discs (both disc and MD) are locked.

To change the information shown in the main display

On the remote control ONLY:

If you try to eject the locked discs

“LOCKED” appears to inform you that the Disc Lock is in use.

Each time you press DISP/CHARA, the information in the main display changes as follows:

While playing or pausing:

	1	2
		3		4
	Clock time
				5
1	Current track No.		4	Current group title*3
2	Current group No.*1		5	Remaining recording
3	Recording length mode			time
	and elapsed playing
	time*2

When the MD recorder stops:

To cancel the prohibition and unlock the discs, repeat

the above procedure.

“UNLOCKED” appears in the main display for a while, and the loaded discs (both disc and MD) are unlocked.

Programing the Playing Order of the Tracks

—Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

On the remote control ONLY:

1 Load an MD.

2 Press MD 3/8, then 7.

The source is changed to “MD.”

	1	2		3
	3			4
			Clock time
1	Total track No.		3	Total playing time*2
2	Total group No.*1		4	Remaining recording time

*1 When the current track does not belong to any groups or when the disc has no group, “– –” will appear.

*2 When the current track or the disc has a title, its title will appear for a while.

*3 When the group has no title, “NO TITLE” appears.

Press PLAY MODE repeatedly so that “MD PROGRAM” appears in the main display.

The PRGM (program) indicator lights up on the display.

•Each time you press the button, play mode changes as follows:

MD PROGRAM MD RANDOM

Normal play MD GROUP

– 25 –