7. Install upper elevator tubes (35) to triangle plates (37) as shown. Install handle assembly (3) to lower elevator tubes (32) using bolt (29), spacers (36), and nut (31) as shown.
3
4
36
36
31
31
30 
37
35
NOTE:
Before going on to next step, set adjustable system assembly to the 10’ (3.05 m) setting.
29
32
30 
29
35
8. Insert bolt (29) through left side upper elevator tube (35), then stretch spring (33) onto bolt (29). Insert bolt (29) through right side upper elevator tube (35) and secure with nut (31).
35
33
29
31
33
WARNING!
USE EYE PROTECTION
WHEN INSTALLING
SPRINGS.
35
3
23 | 02/07 | ID# M6711041 |