Spalding M88604C1 Apply height indicator labels 32 & 31 to height indicators, Shown by turning

Page 16

14.

A.

Apply height indicator labels (32 & 31) to height indicators (30).

Set-up For Left Side

30

10 9 8 7

10 9 8 7

32

Set-up For Right Side

30

7 8 9 10

7	8 9 10	31

B.	Attach height indicators to lower yoke in area shown by turning
	screws (29) into place with a phillips-head screwdriver.

29	10	9	8 7
		9

C.	Attach height indicators
	to lower yoke in area
	shown by turning
	screws (29) into place
	with a phillips-head
	screwdriver.

15.	Install net (4) to rim as shown.

1.

2.

3.

ID# M88604C1

08/06

16

IMPORTANT!

NOTE ORIENTATION

OF HEIGHT

INDICATORS:

10’ MARK SHOULD FACE AWAY FROM BACKBOARD.

			10
	7	8	9
		8	29

4.

Image 16

Contents High End Residential In-Ground Basketball System Required Tools and Materials Parts List Hardware Identifier Bolts & Screws Install nuts 25 onto the ground tube bolts as shown Side View Build drainage hillPlaying Surface Insert bushings 19 into areas shown Playing Surface Mounting plate 2 as shownCompleted Assembly 08/06 ID# M88604C1 Attach elevator adjustment 12 to Lower yokeAttach elevator adjustment 12 to pole bracket Using TWO people to hold the board Attach backboard 13 to upper and lowerYokes 18 First attach board 13 to upper yokeEnd of the rod as shown Figure a Apply height indicator labels 32 & 31 to height indicators Attach height indicatorsInstall net 4 to rim as shown Screws 29 into place with a phillips-head screwdriver08/06 ID# M88604C1 After pole has been secured to the anchor plate 2 loosen nut Feet 05 m Limited Lifetime Warranty