INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
BIKE OPERATION
CONDITIONING TROUBLESHOOTING LIMITED GUIDELINES & MAINTENANCE WARRANTY
MONTHLY LOG SHEETS
MONTH |
|
|
| MONTHLY GOAL |
|
|
|
|
|
|
|
|
| ||
WEEK # | DISTANCE | CALORIES | TIME | ||||
MONTHLY TOTALS :
MONTH |
|
|
| MONTHLY GOAL |
|
|
|
|
|
|
|
|
| ||
WEEK # | DISTANCE | CALORIES | TIME | ||||
MONTHLY TOTALS :
MONTH |
|
|
| MONTHLY GOAL |
|
|
|
|
|
|
|
|
| ||
WEEK # | DISTANCE | CALORIES | TIME | ||||
MONTHLY TOTALS :
30
T R O U B L E S H O O T I N G
Your Horizon Fitness bike is designed to be reliable. However, if you do experience problems with your bike, please reference the troubleshooting guide listed below.
PROBLEM: The console does not turn on.
SOLUTION: Verify the following:
•The outlet the machine is plugged into is functional. Double check that the house breaker has not tripped.
•The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.
•The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.
•The power switch is turned to the ON position (may not apply to all models).
•Turn off the machine and unplug power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched.
PROBLEM: The console turns on but the Time/RPM’s do not count.
SOLUTION: Verify the following:
•Turn off machine and unplug power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched.
•If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or damaged.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Verify the following:
•The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.
•Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.
PROBLEM: The bike makes a squeaking or chirping noise.
SOLUTION: Verify the following:
•The bike is on a level surface.
•Loosen all bolts attached during the assembly process, grease the threads, and tighten again.
31
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
BIKE OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
7/17/08 3:04:32 PM |