11.Using a small plastic bag to keep your fingers clean, apply a generous amount of the included grease to the axle on the right side of the Upright (2).
Slide the Right Upper Body Arm (9) onto the Upright (2).
Attach the Right Upper Body Arm (9) with an M8 x 20mm Screw (80) and an M8 Washer (33).
Repeat this step on the other side of the elliptical.
12.Apply a small amount of grease to a Bolt Set (31).
Hold the end of the Right Pedal Arm (49) inside the bracket on the right Upper Body Leg (6).
Attach the right Upper Body Leg (6) to the Right Pedal Arm (49) with the Bolt Set (31).
Repeat this step on the other side of the elliptical.
Tighten the M8 x 45mm Button Bolts (76).
11
8
2
Grease
9
33
80
12
76 
76
6
31
31
49
Grease
11