Sears 831.23953.1 user manual

Page 14

18. Identify the Right Pedal (13), which is marked

with a “Right” sticker, and orient it as shown.

Attach the Right Pedal (13) to the Right Pedal Arm (49) with three M10 x 45mm Screws (75) and three M10 Split Washers (78). Make sure to use the center hole and the two outer holes to attach the Right Pedal.

Repeat this step on the other side of the

elliptical.

19.Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.

Image 14

Contents Elliptical Exerciser User’s Manual Model No Serial NoTable of Contents Important Precautions Before YOU Begin Part Identification Chart Assembly Wire Tie 42 Tip Avoid pinching the wires. Attach Tip Avoid pinching the Main Wire 42. SlideAvoid pinching Main Wire Tip Start all the Screws before fully tighten- ing themWires Avoid pinchingHexagonal Repeat this step on the other side of the elliptical Page Repeat this step on the other side of the elliptical Page HOW to USE the Elliptical HOW to Level the EllipticalConsole Diagram Features of the Console Turn on the console HOW to USE the Manual ModeSelect the manual mode Follow your progress with the displayTurn on the fan if desired HOW to USE a Preset WorkoutSelect a preset workout Begin pedaling to start the workoutHOW to USE the Sound System FCC InformationHOW to Adjust the Reed Switch Maintenance and TroubleshootingConsole Troubleshooting Amount of mild soap. Important To avoid damageHOW to Adjust the Drive Belt Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Part List Qty DescriptionDrawing a Exploded Drawing B DAY Full Warranty Sears, Roebuck and Co., Hoffman Estates, IL