Schwinn 460 manual Troubleshooting

Troubleshooting

Problem	Check	Solution
No display/partial display/unit	Electrical (wall) outlet	If outlet does not function, use a properly
will not turn on		functioning outlet.
	Connection at front of unit	Connection should be secure and undamaged.
		Replace adapter or connection at unit if damage
		appears.
	Main console cable integrity	Replace cable if wires appear crimped or cut.
	Main console cable connections/	Confirm cable is connected securely at the back
	orientation	of the console and at the base of the console
		mast.
	Console display for cracks or other	Replace console if damaged.
	damage
	Console Display	Replace computer if console only has partial
		display.
Unit operates but Telemetric	Chest Strap	Make sure strap is directly against skin and
HR not displayed		contact area is moist. Strap should be Polar®
		compatible.
	Interference	Try moving unit away from sources of interference
		(TV, Microwave, etc).
	Chest Strap	Connect strap to a functioning Polar® compatible
		device to see if it works. If it does not function,
		replace strap. If strap works with other devices
		but not with the Schwinn® 460, replace HR
		receiver.
No speed/RPM reading	Main console cable integrity	All wires in cable should be intact. Replace cable
		if wires appear crimped or cut.
	Main console cable connections/	Confirm cable is securely connected and
	position	properly positioned. Small latch on connector
		should line up and snap into place.
	Magnet position (requires shroud	Replace flywheel or entire main assembly if you
	removal)	do not see a magnet.
	RPM Sensor (requires shroud	RPM sensor should be aligned with magnet
	removal)	and connected to data cable. Re-align sensor
		if necessary. Replace if there is any damage to
		sensor or connecting wire.

26

Owner’s Manual