INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
DISPLAY |
| |
LEFT HANDLEBAR |
| |
PULSE GRIP | CONSOLE | |
BOTTLE HOLDER | RIGHT HANDLEBAR | |
CONSOLE MAST | ||
| ||
CONSOLE MAST BOOT | HANDLEBAR COVERS | |
TOP COVER | LOWER HANDLEBAR | |
| FRONT STABILIZER TUBE |
PIVOTING FOOT PAD 
ELBOW COVER |
LOWER LINK ARM |
PEDAL ARM
A S S E M B LY STEP 1 |
FRONT STABILIZER TUBE |
BOLT (A) |
MAIN FRAME |
BOLT (B) |
GUIDE RAILS |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
TOOLS INCLUDED
c5mm Allen Wrench
c4mm Allen Wrench
cPhillips Screw Driver
c13/15mm Flat Wrench
cT Wrench
PARTS INCLUDED
c 1 Console | c 7 | Hardware Bags | ||
c 1 Console Mast | c 2 | Handlebar Covers | ||
c 1 | Front Stabilizer Tube | c 2 | Elbow Covers | |
c 1 | Left Handlebar | c 2 | Footpad Brackets | |
c 1 | Right Handlebar | c 2 | Footpad Rubber Inserts | |
c 2 | Lower Link Arms | c Water Bottle | ||
c2 Pivoting Foot Pads
c1 Top Cover
c1 HORIZON FITNESS
A)Open HARDWARE BAG FOR STEP 1.
B)Extend the GUIDE RAILS away from the MAIN FRAME until bolt holes line up.
C)Secure GUIDE RAILS using 2 BOLTS (B).
D)Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A).
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | BOLT (B) |
20 mm | 15 mm |
Qty: 2 | Qty: 2 |
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED WARRANTY
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
LIMITED WARRANTY
E6_Rev.1.2.indd | 8/7/06 4:43:29 PM |