INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
14
A S S E M B LY STEP 8 |
SCREW (L) |
INSIDE ELBOW COVER |
OUTSIDE ELBOW COVER |
A ) Open HARDWARE BAG FOR STEP 8.
B)Attach the OUTSIDE ELBOW COVER to the elbow joint using 1 SCREW (L).
C)Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER. Note the position of the snap tabs before snapping into position.
D)Repeat on other side.
HARDWARE BAG FOR STEP 8 CONTENTS :
SCREW (L) 30 mm Qty: 2
A S S E M B LY STEP 9 |
RIGHT HANDLEBAR |
HANDLEBAR COVERS |
NOTE: There is NO hardware bag for this step. All hardware is
A)Remove
B)Snap HANDLEBAR COVERS together over the RIGHT HANDLEBAR. Note the position of the snap tabs on the covers before snapping into position.
C)Attach HANDLEBAR COVERS with
D)Repeat on other side.
15
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
E6_Rev.1.2.indd | 8/7/06 4:43:39 PM |