INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
10
A S S E M B LY STEP 4 | |
LINK ARM | WAVY WASHER (E) |
| |
| BOLT (B) |
FOOT PAD BRACKET |
|
PEDAL ARM |
|
A)Open HARDWARE BAG FOR STEP 4.
B)Place WAVY WASHER (E) over the LINK ARM axle.
C)Slide the LINK ARM into the PEDAL ARM.
D)Attach FOOTPAD BRACKET to the LINK ARM with 3 BOLTS (B).
E)Repeat on other side.
HARDWARE BAG FOR STEP 4 CONTENTS : |
| |
BOLT (B) | WAVY WASHER (E) | |
29 mm | ||
15 mm | ||
Qty: 2 | ||
Qty: 6 | ||
| ||
| FOOTPAD BRACKET | |
| Qty: 2 |
A S S E M B LY STEP 5 |
RUBBER INSERTS |
SCREWS (F) |
FOOT PAD |
LINK ARM |
A)Open HARDWARE BAG FOR STEP 5.
B)Attach FOOTPAD to LINK ARM using 4 SCREWS (F).
C)Peel backing from RUBBER INSERT and carefully place on top of FOOTPAD.
D)Repeat on other side.
HARDWARE BAG FOR STEP 5 CONTENTS :
SCREW (F)
12mm Qty: 8
11
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
E6_Rev.1.2.indd | 8/7/06 4:43:33 PM |