INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
A S S E M B LY STEP 2 |
CONSOLE WIRES |
CONSOLE MAST |
BOLT (B) |
SPRING WASHER (C) |
FLAT WASHER (D) |
CONSOLE MAST BOOT |
MAIN FRAME |
A)Open HARDWARE BAG FOR STEP 2.
B)Slide CONSOLE MAST BOOT onto the bottom of the CONSOLE MAST.
C)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the CONSOLE MAST.
D)Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (B), 4 SPRING WASHERS (C) and 4 FLAT WASHERS (D).
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (B) | SPRING WASHER (C) | FLAT WASHER (D) |
15 mm | 15 mm | 18 mm |
Qty: 6 | Qty: 6 | Qty: 6 |
A S S E M B LY STEP 3 |
CONSOLE |
MAST |
BOOT |
TOP COVER |
MAIN FRAME |
NOTE: There is NO hardware bag for this step.
A)Slide CONSOLE MAST BOOT up.
B)Carefully snap TOP COVER into the MAIN FRAME.
C)Slide CONSOLE MAST BOOT down over the TOP COVER.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
E6_Rev.1.2.indd | 8/7/06 4:43:31 PM |