C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 6 Attach the upper portion | 1 |
of the handrails to the | |
handrail clamp. |
|
Handrail |
|
Foam grip |
|
Handrail clamp |
|
Rotate handrail clamp. |
|
Secure handrails in |
|
clamp. |
|
2
3
8.Attach the upper portion of the handrails to the handrail clamp (removed in step 5). Position the handrails as shown in Diagram 6, #1. Slide the handrails into the clamp.
9.Rotate the handrail clamp so that it aligns with the mounting holes on the upper column. Diagram 6, #2.
10.Secure the handrails to the handrail clamp. Insert two screws (H) with split lock washers (B) through the handrail clamp. Tighten the screws using the appropriate hex key. Diagram 6, #3. Do not attach the clamp to the upper column at this point.
Diagram 7 Align the vertical handlebars and handrail clamp and route the heart rate cable.
Handrail clamp
Heart rate cable
Handlebar bracket
Vertical handlebar
Handrail
Upper column
11.Slide the vertical handlebar into position. Diagram 7. The handlebar bracket is sandwiched between the upper column and the handrail clamp. Have your assistant open about a two inch gap between the upper column and the handrail clamp by pulling or pushing the handrails toward the foot plates. Position the handlebar bracket between the upper column and handrail clamp.
12.Thread the heart rate cable through the hole in the upper column. Diagram 7.
page 14