C O M M E R C I A L P R O D U C T S D I V I S I O N
Unpacking the C764 Climber
Thank you for purchasing the Precor C764 climber. Built to the exacting standards of the health club environment, the C764 is intended for commercial use and can withstand the rigors of daily club use with little maintenance.
Important: Before using the climber, we urge you to familiarize yourself and your staff with the entire Owner’s Manual. Understanding this manual will help you and your customers use the C764 safely and successfully.
Your C764 climber is carefully inspected before shipment so it should arrive in good operating condition. Precor ships the unit in five pieces:
❏base frame assembly
❏upper column support
❏display console
❏handrails
❏vertical handlebars with
❏Nuts with a nylong base
❏hardware kit, Owner’s Manual, and limited warranty card (The hardware kit is shown in Diagram 2.)
To remove the climber from the wood pallet, locate the lag bolt on the pallet under the right foot pedal (close to the casing) and remove it.
CAUTION: This unit weighs over 180 pounds. To avoid back strain and ensure the safety of the unit and yourself, we suggest that you get assistance before removing the base frame assembly from its container.
STANDARD EQUIPMENT
The C764 incorporates the Precor SmartRate and heart rate features into its display console.
The Precor “touch” heart rate is standard. It provides electrode strips, called “grips,” on the handlebars. When a user places his or her hands over the grips and grasps the handlebars, a heart rate is transmitted to the receiver.
Note: If a user does not wish to use the
OTHER EQUIPMENT
Optional equipment available through your dealer includes:
•POLAR® chest strap
•CSAFE connection for devices such as FitLinxx®.
If you are interested in obtaining Precor option kits for your unit, check with your dealer. For customer support, see Obtaining Service on page 7.
page 9