Precor EFX534i t owner manual Determining the Units of Measure, Electrical power must be supplied

Page 26

C O M M E R C I A L P R O D U C T S D I V I S I O N

To access the Custom Settings Mode, the following must occur:

Electrical power must be supplied.

The foot pedal speed must be maintained at 40 strides per minute. Or, the optional power adapter must be plugged into the EFX and connected to an appropriate power source.

Note: The optional power adapter connection is highly recommended, if you plan to customize the EFX.

Check that the Precor banner appears on the display and, if necessary, maintain the minimum stride rate.

Press the appropriate key sequences.

To select the units of measure and set the maximum workout and pause times, press the following:

Note: The Resistance key in the following series is the key on the left as you face the display. If you press the Resistance ▼▲ keys on the right, you cannot access the Custom

Settings.

Reset, QuickStart, Enter, QuickStart, Resistance , QuickStart, Enter, QuickStart

Important: To access Custom Settings Mode, press Reset while the Precor banner is displayed.Within 1/3 second, begin pressing the key sequences. If the system does not detect a key press (within 1/3 second after Reset), it returns to the banner. Once you begin entering a key sequence, each key must be pressed within four seconds of the other or the Precor banner reappears and you have to begin again.

The functions of the display console keys while in Custom Settings Mode are described in the box below.

Display key functions within the Custom Settings Mode

▼▲ lets you scroll through the various selections that appear.

Enter saves the information being displayed and moves to the next aspect of the program.

Reset exits Custom Settings Mode and displays the Precor banner.

Select displays the name of the data field that you are viewing. Or, toggles between the available selections.

Note: The ▼▲ keys can be gently pressed and held to view several selections. The longer the key is held down, the faster the numbers scroll past.

DETERMINING THE UNITS OF MEASURE

Two different units of measure can be selected, Metric or U.S. standard. Make your selection using the ▼▲ keys. Press Enter once the correct unit is displayed.

Note: Anytime you wish to exit the Custom Settings Mode, press the Reset key. Any previous display attributes that you selected by pressing Enter are saved and re- corded in memory. If no key press is detected within two minutes (when the optional power adapter is attached), the system resets and the Precor banner reappears.

page 26

Image 26
Contents M M E R C I a L P R O D U C T S D I V I S I O N Important Safety Instructions Hazardous Materials and Proper Disposal Safety ApprovalDiagram 1 Avoid injury from the roller arm mechanism Table of Contents Back cover Changing the Display Features using the Select KeyInterval Program User’s authority to operate the equipment RFI Radio Frequency InterferenceEuropean Applications European ApplicationsDiagram 2 EFX serial number location EFX SELF-POWERED FeaturesObtaining Service Model number EFX534i Unit number Serial numberAbout this Manual Equipment and prevent injuries to yourselfOther Equipment Unpacking the EFXStandard Equipment Acquiring the Appropriate ToolsHardware KIT Hardware kitAssembly Instructions Setting Up the EFXInstallation Requirements Diagram Diagram 7 Connect the cables Base tubeDiagram 8 Place the base on supportive blocks Bolts G and washers H Frame stabilizer Diagram 11 Tighten Mounting boltsDiagram 12 Secure Handlebars Protrusions Bracket Tighten bolts securelyM M E R C I a L O D U C T S V I S I O N M M E R C I a L O D U C T S V I S I O N M M E R C I a L O D U C T S V I S I O N Diagram 16 Secure Bracket coverDiagram 18 Clean the ramp Diagram 17 Level the unitRotate rear adjustment pads Foot pedalDiagram 19 Insert the front end cap Removing the Locking PINDampen with water Testing the Heart Rate DisplayDiagram 21 Wearing the chest strap Custom Settings Mode Changing the Custom SettingsDetermining the Units of Measure Electrical power must be suppliedDisplay key functions within the Custom Settings Mode Reset, Enter, QuickStart Setting a Workout Time LimitSetting a Pause Time Limit User ID Entry Program Keys Using Csafe Standard EquipmentEnter Reset Moves the blinking LED from field to fieldEFX534i Display Features on the Display ConsoleDiagram 23 EFX Display Console SmartRate display Center DisplaySelect User Setup PromptsSetup Prompts Description QuickStartPress Quickstart Following occurs Using Quickstarttm During the Setup PromptsWeight prompt Precor bannerCenter Display Informational Displays Prior to Shutdown Low BatterySmartrate Display Diagram 24 Display console keypad Keys on the Display ConsoleDefault Values Prompts Default ValueWeight Loss Zone Heart Rate FeatureUtilizing the Smartrate Feature Exercising on the EFXWorkout Tips Changing the Display Features Using the Select KEY Using the HandlebarsUsing the Stationary Handrail Diagram 26 Using the EFX handlebarsQuick Steps to Working OUT Carefully step down from the EFXA program, This is what happens PAUSE, Cool Down and Exit FeaturesCooling Down After a Workout Is detectedInserting the Locking PIN Press Reset Displays the Workout Summary bannerCool down Mode Pause Mode, youHill Climb Program Manual Mode and the Quickstarttm KEYPrograms Interval ProgramDiagram 27 Target Zones To use the interval program, take the following stepsWeight Loss Program Cross Training ProgramInspection MaintenanceCleaning the Equipment Storing the Chest Strap Symptoms of a LOW BatteryUsing the Power Adapter Servicing the EFX and Long Term StorageReplacing the Battery Power Adapter Power CordM M E R C I a L P R O D U C T S D I V I S I O N Thank You and Welcome to Precor Please indicate the type and number of products purchased Date of Purchase Purchased from Dealer nameProduct Serial Numbers How many members do you have?Conditions and Restrictions Limited WarrantyWarranty Periods and Coverage Complete this portion and keep for your recordsProduct Specifications Electronic Specifications EFX 534i Programs 5 Total EFX 534i Display Readouts