Changing the Interval Course Profile
Interval training provides numerous benefits. Since interval training segments the workout into smaller components, a 20- or
The interval course on the EFX lets you set the course intervals according to your training regimen. It alternates between
At any point during the workout, you can change the settings of the current interval. For example, if a “6” ramp setting and “5” resistance setting causes more effort than you prefer during a Work interval, simply use the Cross Ramp key and/or the Resistance
key to change the settings. The software remembers the new settings for the next Work interval.
If you have purchased the Precor Heart Rate Option and installed the heart rate receiver, you can monitor your workout using the Smart Rate and Heart Rate displays.
Below are some suggestions that may help you incorporate the Interval mode into your workout:
•If you are starting an exercise program, the Interval mode option can help you increase your workload gradually. For example, in the beginning, you may simply want to specify the same resistance and ramp level for both Work and Rest intervals. Then, to increase your effort level, change to a higher resistance and/or ramp setting for your Work interval.
•If you are training with the goal of maintaining a constant pace when on level ground or grade, specify the same resistance for both Work and Rest intervals. Then, gradually increase the ramp during the Work interval while you maintain a constant pace.
To use the interval course, follow the steps in Working Out on Your EFX. At the course prompt, use
the keys to display “INTV,” and press Enter.
To set the interval for the course, take the following steps:
1.When you see “ENTER REST RESISTANCE & RAMP LEVEL” scroll across the display, press the Resistance key until you reach a comfortable level. Press the Cross Ramp
or
key to specify an appropriate level. When the desired resistance and ramp level are displayed, simply continue working
Once you program your desired Rest settings, the EFX returns to it at the beginning of each Rest interval, until you change the settings, or end your workout.
2.When “ENTER WORK RESISTANCE & RAMP LEVEL” scrolls across the display, specify your work resistance (1 through 20) and ramp level (1 to 14). With one hand on the handrail, use the other hand to select the appropriate settings.
Each rest and work interval lasts
To exit the interval course, press and hold the Hold to Reset key for 3 seconds. Refer to Cooling Down After a Workout.
page 14