Viewing the Hour Meter
HOUR appears in the center display. The number of hours that the unit has been in use appears in both the DISTANCE/CALORIES and TIME displays. The hour meter resets to zero after 99,000 hours. Refer to Diagram 10.
| Hundred range | HOUR | |
| Hours | ||
DISTANCE |
| ||
0 0 0 | 05:45 Minutes | ||
CALORIES |
TIME
Ten Thousand range
Diagram 10: Understanding hour meter display
4.If desired, you can press ENTER/SELECT to return to the odometer display. ENTER/SELECT toggles between MILE and HOUR information.
5.When you are ready, press QUICKSTART to move to the next display (model and software version).
Viewing the Model and Software Version
The unit’s model number and software version appear in the TIME display. Refer to Diagram 11.
“21” appears for the 9.21. | 21.30 | |
Indicates treadmill model: |
|
|
Diagram 11: Understanding the model and software version display
6.When you are ready, press the HOLD TO RESET key for more than two seconds to return to the banner.
Owner’s Manual: Advanced Programming and Troubleshooting | 27 |