Turning the Unit ON and OFF
To turn the unit ON and OFF, use the I/O power switch located at the front of the unit, near the power cord. Refer to Diagram 4.
Important: When it is not being used, turn the unit OFF.
Using the Reset Switch
The treadmill is designed to automatically turn off if its electronic boards overheat. A red button near the power switch resets the unit after the thermal circuit breaker trips. Do not press this button indiscriminately. Excessive heat can damage the electronic boards on the treadmill.
To help eliminate overheating, locate your treadmill away from heating ducts. For more information, refer to Advanced Programming and Troubleshooting.
Diagram 4: I/O power switch
Owner’s Manual: Treadmill Safety Features | 7 |