JVC RX-8000VBK manual For U.S.A

Page 2

Warnings, Cautions and Others

 

 

CAUTION

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

 

DO NOT REMOVE COVER (OR BACK)

 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

Caution –– POWER switch!

Disconnect the mains plug to shut the power off completely. The POWER switch in any position does not disconnect the mains line. The power can be remote controlled.

Caution –– SPEAKER LOAD SELECTOR switch!

Match the position of SPEAKER LOAD SELECTOR switch on the back panel to the impedance of the speaker connected, to protect from overheating.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Proper Ventilation

To avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Wall or obstructions

Spacing 15 cm or more

Front

RX-8000VBK

Stand height 15 cm or more

Floor

G-1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents RX-8000VBK For U.S.A Table of Contents Front Panel Remote ControlParts Identification Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connectionsVideo component connections Cassette deck or MD recorderCD recorder DVD player Video cameraTV and/or DBS tuner Digital output terminal Digital connectionsDigital input terminals Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FBasic Operations Turning the Power On and Off StandbyFrom the remote control Selecting the Source to PlayEtc Adjusting the VolumeSelecting the Front Speakers Selecting different sources for picture and soundMuting the Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NamePress Setting repeatedly until Setting the Subwoofer InformationSetting the Speakers for the DSP Modes Output Delay time of the rear speakerTurn Multi JOG to select Frequency appears on the displayTurn Source Selector until Digital Input Digital in Terminal SettingSelecting the Analog or Digital Input Mode To set the Digital 1 terminalShowing the Text Information on Display Using the Sleep Timer Storing the Basic Settings Adjustments One Touch OperationAdjust the sound using the functions listed above Press ONE Touch OPERATION. OnetouchoperationTurn Source Selector to select the band FM or AM Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press TUNER/SEA MemoryAssigning Names to Preset Stations Selecting the FM Reception ModeSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode Press SEA Adjust repeatedlyDAP modes Using the DSP Modes3D-PHONIC modes Dolby Surround Dolby Digital and Dolby Pro Logic DVD Multi Playback ModeSurround modes DTS Digital SurroundSpeaker arrangements Available DSP modes By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Turn Multi JOG to select the center tone level you want Adjust the center tonePress Test again to stop the test tone. Test To make the dialogue clearer, select Center SHARP1Repeatedly until Theater JVC Theater Surround adjustmentsÙ PRO Logic and DSP indicators also light up on the display Appears on the displayFront panel button lights up To cancel the Dolby/DTS Surround modeActivating the DSP Modes Select and play a sound sourceTo cancel the DSP mode Mode you want appears on DisplayRepeatedly until the DSP mode you Want appears on the displayTurn Source Selector until DVD Multi appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Refer to the manual supplied with the DVD playerMulti appears on the display 10 keys are activated for adjusting the soundPress DVD Multi so that DVD Press Menu Using the On-Screen MenusWhen you finish, press Exit Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Creating Your Own SEA Mode Adjusting the DVD Multi Playback ModeSelecting Your Favorite SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press %/ Þto move To SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Setting the Basic Setting Items Also seeAssigning Names to Preset Stations Press %/ Þto move to Preset NAME, then press SETStoring the Preset Stations Also see Press %/ Þ / @/ #to Move in front of a character you wantSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Disc Information screen appears on the TVPress %/ Þto move To Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to Title Input Then press SET Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET For the MD recorderAV Compu Link Remote Control System One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD player-changerCD recorder Cassette deckDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks Returns to the beginning of the current or previous trackIf there are more than one code listed for your brand of TV Release TV PowerTry to operate your TV by pressing TV Power Operating Other Manufacturers’ Video EquipmentTry to operate your Catv converter by pressing Release CATV/DBS PowerIf there are more than one code listed for your brand Try to operate your DBS tuner by pressingRelease VCR 1 Power Try to operate your VCR by pressing VCR 1 PowerTroubleshooting Problem Possible Cause SolutionAudio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF General1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 JVC 0100HIMMDWJEIN

RX-8000VBK specifications

The JVC RX-8000VBK is a robust and versatile audio receiver that delivers exceptional sound quality and a suite of features designed to enhance any home theater experience. As part of JVC's commitment to high-performance audio solutions, the RX-8000VBK stands out with a combination of innovative technologies and user-friendly functionality.

One of the standout features of the RX-8000VBK is its impressive power output. With a robust amplifier section, it delivers 100 watts per channel across 7 channels, ensuring that even the most demanding audio tracks can be played with clarity and authority. This power enables it to drive a variety of speaker configurations, making it suitable for both small and large setups.

The RX-8000VBK supports a wide range of audio formats, including PCM, Dolby Digital, DTS, and more, providing users with the flexibility to enjoy their favorite movies and music without compromise. Its advanced digital signal processing technology enhances the listening experience by ensuring sound is reproduced accurately, maintaining the integrity of the original recording.

Connectivity is another strong point of the RX-8000VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility makes it easy to switch between devices without having to constantly change cables. Additionally, the receiver is equipped with optical and coaxial digital audio inputs for further connectivity options.

For those who appreciate a user-friendly interface, the RX-8000VBK does not disappoint. It comes with an intuitive remote control and an on-screen display that makes setup and navigation straightforward. The inclusion of a built-in AM/FM tuner also ensures that listeners can enjoy their favorite radio stations with clarity.

The receiver incorporates advanced room calibration technology, which helps optimize audio performance based on the specific acoustics of the listening environment. This feature adjusts speaker levels, delays, and EQ settings automatically, delivering tailored sound that suits individual spaces.

In terms of design, the JVC RX-8000VBK features a sleek and modern aesthetic, with a polished finish that complements any home entertainment setup. Its compact form factor allows it to fit neatly into AV racks and cabinets.

Overall, the JVC RX-8000VBK is a powerful audio receiver that excels in delivering rich, immersive sound for a variety of entertainment experiences. With its combination of advanced technology, connectivity options, and user-friendly features, it is a worthwhile investment for anyone looking to elevate their home audio system.
Top Page Image Contents