JVC RX-8000VBK manual Assigning Names to Preset Stations, Selecting the FM Reception Mode

Page 22

To tune in a preset station

On the front panel:

1. Turn SOURCE SELECTOR to

SOURCE SELECTOR

select the band (FM or AM).

The last received station of the selected band is tuned in.

2. Press TUNER PRESET.

TUNER PRESET

3. Turn MULTI JOG until you find the channel you want.

• Turning it clockwise increases the channel

MULTI JOG

 

numbers.

Turning it counterclockwise decreases the channel numbers.

From the remote control:

Note:

When using the FM MODE button on the remote control, be sure that the 10 keys are activated for the tuner, not for the CD and others. (See page 46.)

Assigning Names to Preset Stations

You can assign a name of up to four characters to each preset station. When a preset station is tuned in, its assigned name will appear on the display.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

You can use the following characters: Space (_), A – Z, and 0 – 9.

1. Press FM/AM.

FM/AM

On the front panel ONLY:

• Each time you press the button, the band

alternates between FM and AM.

2. Press the 10 keys to select a preset

CNTR TONE

 

CENTER

1

2

3

1. Tune in a preset station.

See the left.

2. Press TUNER/SEA MEMORY.

TUNER/SEA MEMORY

channel number.

• For channel number 5, press 5.

• For channel number 15, press +10 then 5.

• For channel number 20, press +10 then 10.

• For channel number 30, press +10, +10,

then 10.

 

MENU

 

TEST

REAR-L

 

4

5

6

 

ENTER

 

EFFECT

REAR-R

 

7/P

8

9

SEA MODE

SUBWOOFER

10

0

+10

RETURN

FM MODE

100+

The preset channel number starts flashing for about 10 seconds.

If you turn MULTI JOG while the preset channel number is flashing, you can change the preset channel number.

Note:

When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 46.)

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy

You can change the FM reception mode while receiving an FM broadcast.

• You can store the FM reception mode for each preset station.

3. Press TUNER PRESET, while the preset channel number is flashing.

The first character position starts flashing.

4.Turn MULTI JOG to select the first character, while the first character position is flashing.

TUNER PRESET

MULTI JOG

Press FM MODE on the front panel or on the remote control.

Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”

FM MODE

SUBWOOFER

 

0

 

FM MODE

On the front panel

On the remote control

AUTO MUTING: When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO: Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off on the display.

5. Press TUNER PRESET, while a

TUNER PRESET

 

character you want is flashing.

 

The next character position starts flashing.

6.Repeat steps 4 and 5 to enter up to four characters.

7. Press TUNER/SEA MEMORY

TUNER/SEA MEMORY

 

while the last selected character is

 

flashing after you have assigned a

 

name.

 

To erase the input characters

Insert spaces using the same procedure described above.

20

Image 22
Contents RX-8000VBK For U.S.A Table of Contents Parts Identification Remote ControlFront Panel Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connectionsCD recorder Cassette deck or MD recorderVideo component connections TV and/or DBS tuner Video cameraDVD player Digital input terminals Digital connectionsDigital output terminal Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FBasic Operations Turning the Power On and Off StandbyFrom the remote control Selecting the Source to PlayEtc Adjusting the VolumeSelecting the Front Speakers Selecting different sources for picture and soundMuting the Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameSetting the Speakers for the DSP Modes Setting the Subwoofer InformationPress Setting repeatedly until Output Delay time of the rear speakerTurn Multi JOG to select Frequency appears on the displayTurn Source Selector until Digital Input Digital in Terminal SettingSelecting the Analog or Digital Input Mode To set the Digital 1 terminalShowing the Text Information on Display Using the Sleep Timer Storing the Basic Settings Adjustments One Touch OperationAdjust the sound using the functions listed above Press ONE Touch OPERATION. OnetouchoperationTurn Source Selector to select the band FM or AM Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press TUNER/SEA MemoryAssigning Names to Preset Stations Selecting the FM Reception ModeSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode Press SEA Adjust repeatedly3D-PHONIC modes Using the DSP ModesDAP modes Dolby Surround Dolby Digital and Dolby Pro Logic DVD Multi Playback ModeSurround modes DTS Digital SurroundSpeaker arrangements Available DSP modes By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Turn Multi JOG to select the center tone level you want Adjust the center tonePress Test again to stop the test tone. Test To make the dialogue clearer, select Center SHARP1Repeatedly until Theater JVC Theater Surround adjustmentsÙ PRO Logic and DSP indicators also light up on the display Appears on the displayFront panel button lights up To cancel the Dolby/DTS Surround modeActivating the DSP Modes Select and play a sound sourceTo cancel the DSP mode Mode you want appears on DisplayRepeatedly until the DSP mode you Want appears on the displayTurn Source Selector until DVD Multi appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Refer to the manual supplied with the DVD playerPress DVD Multi so that DVD 10 keys are activated for adjusting the soundMulti appears on the display Press Menu Using the On-Screen MenusWhen you finish, press Exit Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Creating Your Own SEA Mode Adjusting the DVD Multi Playback ModeSelecting Your Favorite SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press %/ Þto move To SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Setting the Basic Setting Items Also seeAssigning Names to Preset Stations Press %/ Þto move to Preset NAME, then press SETStoring the Preset Stations Also see Press %/ Þ / @/ #to Move in front of a character you wantSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Disc Information screen appears on the TVPress %/ Þto move To Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to Title Input Then press SET Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET For the MD recorderAV Compu Link Remote Control System One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD player-changerCD recorder Cassette deckDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks Returns to the beginning of the current or previous trackIf there are more than one code listed for your brand of TV Release TV PowerTry to operate your TV by pressing TV Power Operating Other Manufacturers’ Video EquipmentTry to operate your Catv converter by pressing Release CATV/DBS PowerIf there are more than one code listed for your brand Try to operate your DBS tuner by pressingRelease VCR 1 Power Try to operate your VCR by pressing VCR 1 PowerTroubleshooting Problem Possible Cause SolutionAudio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF GeneralValley Road Wayne, NJ 781 954 6501099 Limited Warranty AUDIO-2 JVC 0100HIMMDWJEIN

RX-8000VBK specifications

The JVC RX-8000VBK is a robust and versatile audio receiver that delivers exceptional sound quality and a suite of features designed to enhance any home theater experience. As part of JVC's commitment to high-performance audio solutions, the RX-8000VBK stands out with a combination of innovative technologies and user-friendly functionality.

One of the standout features of the RX-8000VBK is its impressive power output. With a robust amplifier section, it delivers 100 watts per channel across 7 channels, ensuring that even the most demanding audio tracks can be played with clarity and authority. This power enables it to drive a variety of speaker configurations, making it suitable for both small and large setups.

The RX-8000VBK supports a wide range of audio formats, including PCM, Dolby Digital, DTS, and more, providing users with the flexibility to enjoy their favorite movies and music without compromise. Its advanced digital signal processing technology enhances the listening experience by ensuring sound is reproduced accurately, maintaining the integrity of the original recording.

Connectivity is another strong point of the RX-8000VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility makes it easy to switch between devices without having to constantly change cables. Additionally, the receiver is equipped with optical and coaxial digital audio inputs for further connectivity options.

For those who appreciate a user-friendly interface, the RX-8000VBK does not disappoint. It comes with an intuitive remote control and an on-screen display that makes setup and navigation straightforward. The inclusion of a built-in AM/FM tuner also ensures that listeners can enjoy their favorite radio stations with clarity.

The receiver incorporates advanced room calibration technology, which helps optimize audio performance based on the specific acoustics of the listening environment. This feature adjusts speaker levels, delays, and EQ settings automatically, delivering tailored sound that suits individual spaces.

In terms of design, the JVC RX-8000VBK features a sleek and modern aesthetic, with a polished finish that complements any home entertainment setup. Its compact form factor allows it to fit neatly into AV racks and cabinets.

Overall, the JVC RX-8000VBK is a powerful audio receiver that excels in delivering rich, immersive sound for a variety of entertainment experiences. With its combination of advanced technology, connectivity options, and user-friendly features, it is a worthwhile investment for anyone looking to elevate their home audio system.