JVC RX-8000VBK manual Connecting Audio/Video Components, Connecting the rear and center speakers

Connecting the rear and center speakers

Connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals.

	CENTER		REAR
	SPEAKER	SPEAKERS
Center speaker		RIGHT	LEFT
Left rear	+		+
	Right rear
speaker	speaker
	–		–

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, and the red plug to the audio right jack.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

Turntable

If an earth cable is provided for your turntable, connect the cable to the screw marked (H) on the rear panel.

Connecting the subwoofer speaker

You can enhance the bass by connecting a subwoofer. Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin plugs (not supplied).

SUBWOOFER

OUT

Powered subwoofer

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver. Refer also to the manuals supplied with your components.

Audio Components	Video Components
• Turntable	• DVD player*
• CD player*	• TV*
• Cassette deck	• DBS tuner*
or MD recorder*	• VCR(s)
• CD recorder*	• Video camera

*You can connect these components using the methods described in “Analog connections” (to the right) or in “Digital connections” (see page 8).

RIGHT	LEFT AUDIO
Turntable	PHONO
	CD
	OUT
	(REC)
	TAPE
To audio output	/MD
	IN
	(PLAY)

Note:

Any turntables incorporating a small-output cartridge such as an MC (moving-coil) type must be connected to this receiver through a commercial head amplifier or step-up transformer. Direct connection may result in insufficient volume.

CD player	RIGHT LEFT AUDIO
	PHONO
CD player
	CD
	OUT
To audio output	(REC)
	/MD
	TAPE
	IN
	(PLAY)

5