JVC RX-8000VBK manual Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC audio components through the COMPU LINK jacks (see page 38) in addition to the connections using cables with RCA pin plugs (see pages 5 and 6).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel or the menu function to choose a source, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 13.)

•Refer also to the manuals supplied with your components.

				TV	AUDIO
			TV/CATV/DBS		VCR 1
				CATV/DBS	VCR 1
DVD	DVD MUILTI			CD	TAPE/MD
TV/DBS	VIDEO			PHONO	FM/AM
VCR 1	CDR/VCR 2		ANALOG/DIGITAL		SLEEP
SURROUND	CNTR TONE			CENTER
ON/OFF	1			2	3
				MENU
SURROUND	TEST			REAR-L
MODE	4			5	6
				ENTER
CD-DISC	EFFECT			REAR-R
	7/P			8	9
SOUND	SEA MODE			SUBWOOFER
	10			0	+10
	RETURN			FM MODE	100+
						AUDIO/
					AUDIO/	TV/VCR
					TV/VCR
MENU
					CATV/DBS	CATV/DBS
		SET
EXIT					TEXT
					DISPLAY
TV VOL	CHANNEL			VOLUME		Check to see if its remote
						control mode selector is set
						to the correct position.
TV/VIDEO	VCR 1			TAPE/MD	MUTING	To operate the audio
	CONTROL
/REW		PLAY			FF/	system, TVs, VCRs, and
DOWN	TUNING				UP	DVD players, set it to
REC		STOP			PAUSE	“AUDIO/TV/VCR.”
RM-SRX8000J		REMOTE CONTROL
46

Tuner

You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”):

FM/AM: Alternates between FM and AM.

After pressing FM/AM (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations:

1 – 10, +10: Selects a preset channel number directly. For channel number 5, press 5.

For channel number 15, press +10, then 5. For channel number 20, press +10, then 10.

TUNING UP/TUNING DOWN:

Tunes into stations.

FM MODE: Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”):

SURROUND ON/OFF: Turns on or off the Surround modes – Dolby Pro Logic, Dolby Digital, and DTS Digital Surround.

SURROUND MODE: Selects the DSP modes.

After pressing SOUND (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations:

SEA MODE:	Changes the SEA modes.
SUBWOOFER – / +: Adjusts the subwoofer output level.
CENTER – / +:	Adjusts the center speaker output level.
REAR•L – / +:	Adjusts the left rear speaker output level.
REAR•R – / +:	Adjusts the right rear speaker output level.
EFFECT:	Selects the effect level.
TEST:	Turns on or off the test tone output.
CNTR TONE:	Selects the center tone.

Note:

After adjusting sounds, press the corresponding source selecting button or CD-DISC to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

CD player

After pressing CD (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on the CD player:

PLAY:	Starts playing.
4:	Returns to the beginning of the current (or
¢:	previous) track.
	Skips to the beginning of the next track.
STOP:	Stops playing.
PAUSE:	Pauses playing. To release it, press PLAY.
1 – 10, +10:	Selects a track number directly.
	For track number 5, press 5.
	For track number 15, press +10, then 5.
	For track number 20, press +10, then 10.
	For track number 30, press +10, +10, then 10.