JVC RX-8000VBK manual Press Text Display while CD or MD is selected as the source, Press Exit

Page 42

OPERATIONS

To use this remote control system, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’s input mode to the proper position to which the receiver is connected. Make sure you have connected the CD player or

MD recorder equipped with the TEXT COMPU LINK remote control system. If not, you cannot use the following functions.

On-Screen Operation buttons (on the remote control)

1Source name: CD or MD

2Select or , then press SET to change the disc.

3 Track numbers and track titles.

The current playing (selected) track is indicated in yellow.

When you move to a track number, you can change the track information by pressing @/ #. Each time you press the button, track information alternates

between its track title and its performer. (You can also start playing the track by pressing SET.)

4Select this (move in front), then press SET to go to

the DISC SEARCH screen (see page 41).

5Select this (move in front), then press SET to go to the TITLE INPUT screen (see page 42).

6This appears only when a CD Text is selected.

 

 

 

STANDBY

ON

 

 

TV/CATV/DBS

VCR 1

 

 

 

POWER

POWER

DVD

DVD MUILTI

 

CD

TAPE/MD

TV/DBS

VIDEO

 

PHONO

FM/AM

VCR 1

CDR/VCR 2

ANALOG/DIGITAL

SLEEP

SURROUND

CNTR TONE

 

CNTR

ON/OFF

1

 

2

3

 

 

 

MENU

SURROUND

TEST

 

REAR-L

MODE

4

 

5

6

 

 

 

ENTER

DISC

EFFECT

 

REAR-R

 

7/P

 

8

9

SOUND

SEA MODE

 

SUBWOOFER

 

10

 

0

+10

 

RETURN

FM MODE/MUTING 100+

 

 

 

 

AUDIO/

 

 

 

 

TV/VCR

MENU

 

 

 

 

 

 

 

 

CATV/DBS

 

SET

 

 

EXIT

 

 

 

TEXT

 

 

 

 

DISPLAY

TV VOL

CHANNEL

VOLUME

TV/VIDEO

VCR 1

 

TAPE

MUTING

 

CONTROL

 

/REW

PLAY

FF/

DOWN

TUNING

UP

REC

STOP

PAUSE

MENU

 

 

SET

EXIT

TEXT

DISPLAY

 

7Disc information such as the disc title, performer, and music genre.

When this is selected ( in front), you can change the disc information by pressing @/ #. Each time you press the button, disc information (see “Note on 7”) changes.

8Select or , then press SET to change the track.

9 Usable buttons and their functions for the current selection.

Indication here will be changed according to what is

currently selected ( in front) on the screen. See “Note on 9.”

Note on 7:

The following information will appear on the display:

RM-SRX8000J REMOTE CONTROL

For CD Texts — Disc title, Performer, Genre, Song writer, Composer, Arranger, Message

Only recorded information will be shown. If there is no data, “NO DATA” will appear.

For MDs — Disc title

If there is no data, “NO DATA” will appear.

Showing the Disc Information on the TV Screen

Press TEXT DISPLAY while “CD” or “MD” is selected as the source.

The Disc Information screen appears on the TV.

1

2

3

4

5

Note on 9:

For example, the SET button will be used to start play (PLAY), to go to the next screen (ENTER), and to determine the selection (ENTER).

To exit from the Disc information screen:

Press EXIT.

Notes:

• The on-screen display will disappear in the following cases:

– if no operation is done for about 10 minutes.

6– if you do any operation other than explained in this section.

7• To control the MD recorder using the TEXT COMPU LINK remote

control system, you have to change the source name shown on the display from “TAPE” to “MD.” (See page 13.)

8• Some special characters and marks cannot be displayed correctly.

9

40

Image 42
Contents RX-8000VBK For U.S.A Table of Contents Remote Control Parts IdentificationFront Panel Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connectionsCassette deck or MD recorder CD recorderVideo component connections Video camera TV and/or DBS tunerDVD player Digital connections Digital input terminalsDigital output terminal Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FBasic Operations Turning the Power On and Off StandbyFrom the remote control Selecting the Source to PlayEtc Adjusting the VolumeSelecting the Front Speakers Selecting different sources for picture and soundMuting the Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NameSetting the Subwoofer Information Setting the Speakers for the DSP ModesPress Setting repeatedly until Output Delay time of the rear speakerTurn Multi JOG to select Frequency appears on the displayTurn Source Selector until Digital Input Digital in Terminal SettingSelecting the Analog or Digital Input Mode To set the Digital 1 terminalShowing the Text Information on Display Using the Sleep Timer Storing the Basic Settings Adjustments One Touch OperationAdjust the sound using the functions listed above Press ONE Touch OPERATION. OnetouchoperationTurn Source Selector to select the band FM or AM Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press TUNER/SEA MemoryAssigning Names to Preset Stations Selecting the FM Reception ModeSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode Press SEA Adjust repeatedlyUsing the DSP Modes 3D-PHONIC modesDAP modes Dolby Surround Dolby Digital and Dolby Pro Logic DVD Multi Playback ModeSurround modes DTS Digital SurroundSpeaker arrangements Available DSP modes By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Turn Multi JOG to select the center tone level you want Adjust the center tonePress Test again to stop the test tone. Test To make the dialogue clearer, select Center SHARP1Repeatedly until Theater JVC Theater Surround adjustmentsÙ PRO Logic and DSP indicators also light up on the display Appears on the displayFront panel button lights up To cancel the Dolby/DTS Surround modeActivating the DSP Modes Select and play a sound sourceTo cancel the DSP mode Mode you want appears on DisplayRepeatedly until the DSP mode you Want appears on the displayTurn Source Selector until DVD Multi appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Refer to the manual supplied with the DVD player10 keys are activated for adjusting the sound Press DVD Multi so that DVDMulti appears on the display Press Menu Using the On-Screen MenusWhen you finish, press Exit Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Creating Your Own SEA Mode Adjusting the DVD Multi Playback ModeSelecting Your Favorite SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press %/ Þto move To SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Setting the Basic Setting Items Also seeAssigning Names to Preset Stations Press %/ Þto move to Preset NAME, then press SETStoring the Preset Stations Also see Press %/ Þ / @/ #to Move in front of a character you wantSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Disc Information screen appears on the TVPress %/ Þto move To Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to Title Input Then press SET Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET For the MD recorderAV Compu Link Remote Control System One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD player-changerCD recorder Cassette deckDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks Returns to the beginning of the current or previous trackIf there are more than one code listed for your brand of TV Release TV PowerTry to operate your TV by pressing TV Power Operating Other Manufacturers’ Video EquipmentTry to operate your Catv converter by pressing Release CATV/DBS PowerIf there are more than one code listed for your brand Try to operate your DBS tuner by pressingRelease VCR 1 Power Try to operate your VCR by pressing VCR 1 PowerTroubleshooting Problem Possible Cause SolutionAudio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF General781 954 650 Valley Road Wayne, NJ1099 Limited Warranty AUDIO-2 JVC 0100HIMMDWJEIN

RX-8000VBK specifications

The JVC RX-8000VBK is a robust and versatile audio receiver that delivers exceptional sound quality and a suite of features designed to enhance any home theater experience. As part of JVC's commitment to high-performance audio solutions, the RX-8000VBK stands out with a combination of innovative technologies and user-friendly functionality.

One of the standout features of the RX-8000VBK is its impressive power output. With a robust amplifier section, it delivers 100 watts per channel across 7 channels, ensuring that even the most demanding audio tracks can be played with clarity and authority. This power enables it to drive a variety of speaker configurations, making it suitable for both small and large setups.

The RX-8000VBK supports a wide range of audio formats, including PCM, Dolby Digital, DTS, and more, providing users with the flexibility to enjoy their favorite movies and music without compromise. Its advanced digital signal processing technology enhances the listening experience by ensuring sound is reproduced accurately, maintaining the integrity of the original recording.

Connectivity is another strong point of the RX-8000VBK. It features multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility makes it easy to switch between devices without having to constantly change cables. Additionally, the receiver is equipped with optical and coaxial digital audio inputs for further connectivity options.

For those who appreciate a user-friendly interface, the RX-8000VBK does not disappoint. It comes with an intuitive remote control and an on-screen display that makes setup and navigation straightforward. The inclusion of a built-in AM/FM tuner also ensures that listeners can enjoy their favorite radio stations with clarity.

The receiver incorporates advanced room calibration technology, which helps optimize audio performance based on the specific acoustics of the listening environment. This feature adjusts speaker levels, delays, and EQ settings automatically, delivering tailored sound that suits individual spaces.

In terms of design, the JVC RX-8000VBK features a sleek and modern aesthetic, with a polished finish that complements any home entertainment setup. Its compact form factor allows it to fit neatly into AV racks and cabinets.

Overall, the JVC RX-8000VBK is a powerful audio receiver that excels in delivering rich, immersive sound for a variety of entertainment experiences. With its combination of advanced technology, connectivity options, and user-friendly features, it is a worthwhile investment for anyone looking to elevate their home audio system.