ProForm PFTL99220 user manual Follow your progress with the displays

Page 13

To stop the program temporarily, press the Stop button. The Time/Pace display will begin to flash.

To restart the program, press the Start button or the Speed button. To end the program, press

the Stop button, remove the key, and then reinsert the key.

4 Follow your progress with the displays.

See step 5 on page 10.

5 Measure your heart rate if desired.

See step 6 on page 11.

6 Turn on the fan if desired.

See step 7 on page 11.

When the program is finished, remove the key

7 from the console.

When the program has ended,

make sure that

the incline of the treadmill is at the lowest set-

ting. Next, remove the key from the console and

put it in a safe place.

Note: If the displays and

various indicators on the console remain lit after the key is removed, the console is in the “demo” mode. See page 20 and turn off the demo mode.

When you are finished using the treadmill, move the reset/off circuit breaker switch near the power cord to the off position and unplug the power cord.

HOW TO USE HEART RATE PROGRAMS

 

CAUTION:

If you have heart prob-

lems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs. If you are taking medication regu- larly, consult your physician to find whether the medication will affect your exercise heart rate.

Follow the steps below to use a heart rate program.

Note: You must wear the optional chest pulse sen- sor (see page 20) to use a heart rate program.

1

Put on the chest pulse sensor.

 

 

 

See the instructions included with the optional

 

 

chest pulse sensor.

 

 

2

Insert the key fully into the console.

 

 

 

See HOW TO TURN ON THE POWER on page

 

 

 

10.

 

 

3

Select a heart rate program.

 

 

 

When the key

 

 

 

is inserted, the

 

 

 

manual mode

 

 

 

will be se-

 

 

 

lected. To se-

 

 

 

lect a heart

 

 

 

rate program,

 

 

 

press the Program Select button repeatedly until

 

 

one of the two heart rate program indicators lights.

 

 

The two profiles on the left side of the matrix show

 

how the target heart rate will change during the

 

 

programs. During heart rate program 1, your heart

 

 

rate will reach approximately 85% of your

esti-

 

mated maximum heart rate;

during heart rate pro-

gram 2, your heart rate will reach approximately 80% of your estimated maximum heart rate.

Note: Your estimated maximum heart rate is de- termined by subtracting your age from 220. For example, if you are 30 years old, your estimated maximum heart rate is 190 beats per minute

(220 – 30 = 190).

13

Image 13
Contents Model No. PFTL99220 Serial No QUESTIONS?To Avoid Customer HOT LineImportant Precautions Table of ContentsNever insert any object into any opening CD player or VCR when you are not using themBefore YOU Begin Using the treadmillRight Side BackMake sure that the power cord is unplugged AssemblyDecal 91 is in the indicated location WayPlace Console 107 as shown Uprights. Retighten all four Upright BoltsPerformant Lube HOW to Plug in the Power CordImportant Never apply silicone spray or other This product must be grounded.If it should malfuncCDs, call toll-free Features of the ConsolePrograms HOW to USE the Manual Mode HOW to Turn on the PowerPlay See page 20 and turn off the demo modeMeasure your heart rate if desired Next, stand on Foot railsSelect one of the preset programs HOW to USE Preset ProgramsPress the Start button or the Speed Start the programFollow your progress with the displays Have already entered Enter your age and a maximum speed settingYou have not entered your age, press Turn on the fans if desiredAdjust the volume if desired Next settings of the CD programPress the Play/Pause button to start Program Button or the SpeedUAL Mode on page 10. Note Due to the nature HOW to Play Music CDSFollow your progress with the track Displays Whenkey. the program is completed, removeHOW to Connect the Treadmill to Your Computer HOW to Connect the Treadmill to Your VCR or ComputerTreadmill is about to change Press the Play button on your VCRFor speed Console. HoweverNext settings of the program HOW to USE Programs Directly from OUR WEB SiteWhen the program has ended, remove the key Follow the on-line instructions to start ProgramHOW to Level the Treadmill Information MODE/DEMO ModeButtons on the console will not operate So the display is blankHOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Solution TroubleshootingPower Cord Come damaged. Remove the key Problem The walking belt slows when walked onIf the walking Belt has shifted to the leftExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Description Photo Switch WireWasher Internal Star Washer113 Red Wire, M/F 114 Motor Bracket Bolt Part Identification ChartBlack Wire, M/F 101 Console Base 120 Right Handgrip 102 121R0903A DRAWING-Model109 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R0903A