ProForm PFTL99220 Problem The walking belt slows when walked on, Come damaged. Remove the key

Page 23

With the help of a second person, carefully raise the Upright Base (97) as shown. Carefully pivot the Hood (123) off.

Locate the Reed Switch (22) and the Magnet (19) on

the left side of the Pulley (18). Turn the Pulley until the

Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed

Switch is about 1/8”. If necessary, loosen the Screw

(23)and move the Reed Switch slightly. Retighten the Screw. Reattach the Hood, and run the treadmill for a few minutes to check for a correct speed reading.

 

 

97

 

123

 

1/8”

 

18

 

 

22

 

 

 

23

19

 

 

Top

 

 

View

 

 

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

2”–3”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a. If the walking belt is off-center,

first remove the key

 

and UNPLUG THE POWER CORD

. If the walking

 

belt has shifted to the left,

use the allen wrench to

 

turn the left rear roller bolt clockwise 1/2 of a turn;

if

 

the walking belt has shifted to the right,

turn the

 

bolt counterclockwise 1/2 of a turn. Be careful not to

 

 

overtighten the walking belt. Plug in the power cord,

 

 

insert the key, and run the treadmill for a few minutes.

 

 

Repeat until the walking belt is centered.

 

 

b. If the walking belt slips when walked on,

first re-

 

move the key and

UNPLUG THE POWER CORD

.

 

Using the allen wrench, turn both rear roller bolts

 

 

clockwise, 1/4 of a turn. When the walking belt is cor-

 

rectly tightened, you should be able to lift each side of

 

the walking belt 2 to 3 inches off the walking platform.

 

Be careful to keep the walking belt centered. Plug in

 

 

the power cord, insert the key, and carefully walk on

 

 

the treadmill for a few minutes. Repeat until the walk-

 

 

ing belt is properly tightened.

 

 

a

b

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Customer HOT Line QUESTIONS?Model No. PFTL99220 Serial No To AvoidImportant Precautions Table of ContentsNever insert any object into any opening CD player or VCR when you are not using themBack Using the treadmillBefore YOU Begin Right SideWay AssemblyMake sure that the power cord is unplugged Decal 91 is in the indicated locationPlace Console 107 as shown Uprights. Retighten all four Upright BoltsThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Important Never apply silicone spray or otherPrograms Features of the ConsoleCDs, call toll-free HOW to USE the Manual Mode HOW to Turn on the PowerNext, stand on Foot rails See page 20 and turn off the demo modePlay Measure your heart rate if desiredStart the program HOW to USE Preset ProgramsSelect one of the preset programs Press the Start button or the SpeedFollow your progress with the displays Turn on the fans if desired Enter your age and a maximum speed settingHave already entered You have not entered your age, pressButton or the Speed Next settings of the CD programAdjust the volume if desired Press the Play/Pause button to start ProgramWhenkey. the program is completed, remove HOW to Play Music CDSUAL Mode on page 10. Note Due to the nature Follow your progress with the track DisplaysHOW to Connect the Treadmill to Your Computer HOW to Connect the Treadmill to Your VCR or ComputerConsole. However Press the Play button on your VCRTreadmill is about to change For speedFollow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteNext settings of the program When the program has ended, remove the keySo the display is blank Information MODE/DEMO ModeHOW to Level the Treadmill Buttons on the console will not operateHOW to Lower the Treadmill for USE HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Power Cord TroubleshootingSolution Belt has shifted to the left Problem The walking belt slows when walked onCome damaged. Remove the key If the walkingExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Internal Star Washer Photo Switch WireDescription Washer101 Console Base 120 Right Handgrip 102 121 Part Identification Chart113 Red Wire, M/F 114 Motor Bracket Bolt Black Wire, M/FR0903A DRAWING-Model109 Part No R0903A HOW to Order Replacement PartsLimited Warranty Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Top Page Image Contents