ProForm PFTL71730 user manual Troubleshooting, Solution, Cord

Page 25

TROUBLESHOOTING

Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor that meets all of the specifications described on page 9. Important: The treadmill is not compatible

with GFCI-equipped outlets.

b. Make sure that the key is fully inserted into the console.

c.Check the reset/off circuit breaker located on the frame near the power cord. If the breaker protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the breaker back in.

PROBLEM: The power turns off during use

SOLUTION: a. Check the reset/off circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console and then reinsert it.

c

Off Reset

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

 

CDs and videos are played

 

 

SOLUTION:

a. With the key inserted in the console, press one of the Incline buttons.

While the incline is

 

changing, remove the key.

After a few seconds, re-insert the key. The treadmill will automati-

cally rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.

b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently

damaged. Remove the key and

UNPLUG THE POWER

CORD

. Using the included allen wrench, turn both rear

roller adjustment bolts counterclockwise 1/4 of a turn.

When the walking belt is properly tightened, you should

be able to lift

the edges

of the walking belt 3 to 4 inches

off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

b

3–4”

Rear Roller Adjustment Bolts

 

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents To Avoid QUESTIONS?Customer HOT Line Table of Contents Use the treadmill only as described in this manual Important PrecautionsWear appropriate exercise clothes when Move the Treadmill onNever drop or insert any object into any open- ing To the next settings of the CD or video programBack Before YOU BeginWire AssemblyRubber mallet CuttersBase WithMake sure that no wires are pinched.See step Make sure that the power cord is unpluggedRemove the Console Back Included with the receiverTreadmill Operation HOW to Plug in the Power CordPerformant Lube Use only a single-outlet surge suppressor that isCDs or videocassettes, call toll-free Features of the ConsoleTrainer program HOW to USE the Manual Mode Pulse/Calories/Fat See page 22 and turn off the demo modeDistance/Incline/Laps Display Speed display -ThisSelect one of the personal trainer programs HOW to USE Personal Trainer ProgramsStart the program Will move downwardSecure place Tings for the next segment To restart the program, press the StartMode See onMemory. The three columns of indicators will then HOW to Create Custom Programs4When the program has ended, remove the key Select one of the custom programsThree columns of indi Cators are lit Matrix, see HOW to HOW to USE Custom Programs4Follow your progress with the displays Turn on the fans if desiredHOW to Connect Your Portable Stereo HOW to Connect Your Portable CD PlayerVideocassettes HOW to Connect Your Computer HOW to Connect Your Home StereoPlug the adapter into the Line OUT jack on your stereo Phones jack, see instruction BPrograms HOW to Connect Your VCRInsert the key into the console 4VCRAdjust the volume of your CD player or VCR Next settings of the CD or video programTings of the CD or video program Follow your progress with the LED track DisplaysIncline will change to the next settings HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Return to the treadmill and stand on the footHOW to Adjust the Firmness Cushioning System Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Solution TroubleshootingCord Shifted to the left Power CordHas shifted to the right Remove the key from the consoleExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Page Description Screw Bolt Base Washer Part Identification ChartNut 75-4 R0703A Exploded Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R0703A

PFTL71730 specifications

The ProForm PFTL71730 is an innovative treadmill designed for both casual runners and seasoned athletes, combining a range of features and technologies that cater to the diverse needs of fitness enthusiasts. This model stands out with its powerful 2.5 horsepower motor, providing enough strength for brisk walking, jogging, and even intense running sessions. With a top speed of 10 mph, users can easily adjust the intensity of their workouts to align with their fitness goals.

One of the major highlights of the ProForm PFTL71730 is its spacious running surface, measuring 20 inches wide by 55 inches long. This generous area ensures comfortable strides for the user, minimizing the risk of accidental missteps. Additionally, the cushioned running deck is designed to reduce the impact on joints, making it an excellent choice for individuals recovering from injuries or those looking to minimize wear and tear on their bodies.

This treadmill also boasts an impressive incline feature, offering automatic adjustments up to 10%. This allows users to simulate various terrains, providing a more engaging workout that helps in building strength and endurance. The Intensity Training program options are further enhanced by the inclusion of built-in fitness apps, offering a variety of customizable workout routines that can cater to all fitness levels. The integrated heart rate monitor is another noteworthy feature, enabling users to track their workout intensity and manage their health more effectively.

Another attractive aspect of the ProForm PFTL71730 is its compatibility with iFit technology. This feature allows users to connect the treadmill to their Wi-Fi network, unleashing a full library of interactive workouts led by certified personal trainers. Users can virtually run in different locations around the world, providing a unique and immersive experience that keeps motivation high.

In terms of design, the ProForm PFTL71730 is compact and user-friendly. It can be easily folded for storage, making it a great option for those with limited space. The clear and intuitive LCD display provides real-time feedback on essential workout metrics, including time, distance, speed, and calories burned.

Overall, the ProForm PFTL71730 treadmill is an outstanding piece of fitness equipment that seamlessly combines performance, technology, and user-centric design features. Whether you are looking to improve your fitness, test your limits, or simply maintain a healthier lifestyle, this treadmill offers the versatility and functionality needed to keep you on track toward your goals.
Top Page Image Contents