ProForm 831.24633.0 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own phillips screwdriver

, rubber

mallet

, and adjustable wrench

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 23. The number after the parentheses shows the quan- tity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. If a part is missing, call toll-free1-888-533-1333. To avoid damaging plastic parts, do not use power tools for assembly.

1/4” Star

3/4” Screw (2)–8

1” Tek Screw (39)–4

Wheel Bolt (64)–2

 

 

 

Washer (95)–4

 

 

 

 

 

 

 

 

 

 

Handrail

2 1/4” Bolt (93)–2

 

 

 

Bolt (37)–4

5/16” Star

3/8” Star

1/4” Washer

 

Washer (5)–4

 

(38)–4

 

Washer (101)–4

 

 

 

 

 

 

2 3/4” Bolt (100)–2

Extension Leg

Nut (13)–2

3 1/2” Bolt (96)–4

Nut (46)–2

1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

With the help of a second person, carefully tip

 

 

 

the treadmill onto its left side as shown. Partially

69

 

 

fold the Frame (86) so the treadmill is more sta-

 

 

 

ble. Do not fully fold the Frame until the

 

 

 

treadmill is completely assembled.

93

 

 

 

 

 

Insert an Extension Leg (63) into the base of the

101

 

 

 

 

 

right Upright (69) as shown. Hold an Extension

 

 

101

Leg Nut (46) in the bottom of the Extension Leg,

 

 

 

 

 

and thread a 2 1/4” Bolt (93) with a 5/16” Star

 

 

 

Washer (101) into the top of the Extension Leg.

63

46

100

Next, thread a 2 3/4” Bolt (100) with a 5/16” Star

 

 

 

 

 

Washer (101) into the bottom of the Extension

 

 

 

leg. Firmly tighten the Bolts.

86

 

 

 

 

 

 

6

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Treadmill Exerciser Model No Serial NoTable of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedLeg. Firmly tighten the Bolts As shown. Do not overtighten the Wheel Frame 86 until the treadmill is com Pletely assembledNot Connected PROPERLY, the CON Sole MAY be Damaged WhenArm is on the indicated side of the Console Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt HOW to Turn on the Power Console DiagramFeatures of the Console Calorie Goal ProgramsInsert the key into the console HOW to USE the Manual ModeSelect the manual mode Change the incline of the treadmill as desiredMeasure your heart rate if desired When you are finished, remove the keyHOW to USE a Calorie Goal Program Select a calorie goal programInformation MODE/DEMO Mode HOW to USE the Upper Body Arms HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Problem The upper body arms squeak during useWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Key Qty Description If a part is missing, call toll-freeExploded R0307A Exploded Drawing C-Model No Exploded Drawing D-Model No DAY Full Warranty Sears, Roebuck and Co., Hoffman Estates, IL
Top Page Image Contents