8.Attach the Left Upper Body Arm (76) to the left Upright (69) with two 3 1/2” Bolts (96), two 1/4” Washers (38), and two 3/8” Star Washers (5) as shown. Make sure that the Left Upper Body
Arm is on the indicated side of the Console (43).
Attach the Right Upper Body Arm (not shown) to the right Upright (not shown) in the same way.
9.Attach the Latch Housing (29) and the Latch Spacer (98) to the left Upright (69) with two 3/4” Screws (2). Make sure that the large hole in the Latch Housing is on the side shown. Do not overtighten the Screws.
Remove the knob from the pin. Make sure that the collar and the spring are on the pin. Insert the pin into the Latch Housing (29), and tighten the knob back onto the pin.
8 |
|
|
| 69 | 76 |
| 43 | |
|
| |
|
| 5 |
38 |
|
|
|
| 5 |
96 |
|
|
9 |
|
|
|
| 98 |
Large Hole | 29 |
|
Knob |
|
|
2 |
|
|
Spring 
69
Collar
Pin
10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 19). To protect the floor or carpet, place a mat under the treadmill.
9