ProForm 400C Operation and Adjustment, PRE-LUBRICATED Walking Belt, HOW to Plug in the Power Cord

Page 13

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur- 1 rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is

 

 

 

2

properly installed and earthed in accordance with all local codes and

 

 

 

ordinances. Important: The treadmill is not compatible with

 

 

GFCI-equipped outlets.

 

 

 

 

 

Socket on Treadmill

Power

Cord

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

13

Image 13
Contents QUESTIONS? Please Contact OUR CUS- Tomer Service Department DirectlyModel No. PATL30506.0 Serial No Table of Contents Important Precautions Page Back Right Side Before YOU BeginAssembly Washers 6 do not tighten the Upright Bolts Yet Make sure that the power cord is unpluggedUpright Bolts yet Tighten the Nut yet Nut yetPage Losing the Spring Clip. Note Extra Spring Clips Front View Side View View from Above ScrewsPage HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual Mode Select a preset program HOW to USE a Preset ProgramMeasure your heart rate if desired Whenkey. you are finished exercising, removeInformation MODE/DEMO Mode When the program is completed, remove Key from the consoleHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part LIST-Model No. PATL30506.0Exploded DRAWING-Model No. PATL30506.0 Limited Warranty Ordering Replacement PartsGoodfamily, Inc