ProForm 400C user manual

Page 9

6.Pull the wire through the Right Upright (39) until the Upright Wire (69) extends from both ends of the Right Upright. Then, disconnect and discard the wire.

7.Route the Upright Wire (69) through one of the Handrails (40). Attach the Handrail to the Right Upright (39) with two Handrail Bolts (9) and two Handrail Star Washers (11). Do not to pinch the Upright Wire.

Attach the other Handrail (40) to the Left Upright (38) with two Handrail Bolts (9) and two Handrail Star Washers (11). Firmly tighten the Handrail Bolts.

6
Wire	69
	39
7
9
11	69
11
38	9
	9
40	11
	11
40
	39
9

Image 9

Contents Please Contact OUR CUS- Tomer Service Department Directly QUESTIONS?Model No. PATL30506.0 Serial No Table of Contents Important Precautions Page Back Right Side Before YOU Begin Assembly Make sure that the power cord is unplugged Washers 6 do not tighten the Upright Bolts YetUpright Bolts yet Tighten the Nut yet Nut yetPage Losing the Spring Clip. Note Extra Spring Clips Front View Side View View from Above ScrewsPage Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Select a preset program HOW to USE a Preset ProgramMeasure your heart rate if desired Whenkey. you are finished exercising, removeInformation MODE/DEMO Mode When the program is completed, remove Key from the consoleHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part LIST-Model No. PATL30506.0Exploded DRAWING-Model No. PATL30506.0 Ordering Replacement Parts Limited WarrantyGoodfamily, Inc