1. Make sure that the power cord is unplugged. | 1 |
|
|
|
|
| |
Identify the Right Upright (39), which has a |
|
|
|
square hole in the location shown. |
|
|
|
Orient the Right Upright (39) and the Base (37) |
|
|
|
as shown. Attach the Right Upright to the Base |
|
|
|
with two Upright Bolts (4) and two Upright Star |
|
|
|
Washers (6); do not tighten the Upright Bolts |
|
|
|
yet. | 39 |
|
|
|
|
| |
| 37 |
|
|
|
|
| 6 |
|
|
| 4 |
| Square Hole |
| |
2. Orient the Left Upright (38) as shown, and attach | 2 |
|
|
it to the Base (37) with two Upright Bolts (4) and |
|
| |
Latch |
|
| |
two Upright Star Washers (6); do not tighten |
|
| |
Holes |
|
| |
the Upright Bolts yet. |
|
| |
|
|
| |
| 37 |
|
|
| 38 |
|
|
|
|
| 6 |
|
| 6 | 4 |
|
|
| |
3. Turn the Base (37) over, and set it near the front | 3 |
|
|
of the treadmill as shown. |
|
| |
39 |
|
| |
|
|
| |
Locate the wire in the Right Upright (39). See the | Wire |
|
|
37 |
|
| |
inset drawing. Secure the wire to the connector | Wire |
| |
on the Upright Wire (69). Then, insert the connec- | 69 |
| |
tor on the Upright Wire into the square hole in |
|
|
|
the Right Upright. |
|
|
|
|
|
| 69 |
| 7 |
|
|