ProForm 485 CS manual Problem The walking belt slows when walked on

Page 26
Idler Roller Bolts
b 2–3 in.

Remove the three M4.2 x 19mm Hood Screws (13) and carefully pivot the Hood (53) off.

Locate the Reed Switch (54) and the Magnet (42) on the left side of the Pulley (44). Turn the Pulley until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If neces- sary, loosen the M4.2 x 19mm Screw (1), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood (not shown), and run the tread- mill for a few minutes to check for a correct speed reading.

13

53

1/8 in.

42

54

44

Top

View

 

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 13. b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

c. If the walking belt still slows when walked on, see the front cover of this manual.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Please do not Contact QUESTIONS?Model No. PFTL95908.0 Serial No Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Pulse sensor is not a medical deviceCord immediately after use, before cleaning Before YOU Begin Assembly Page Bolts yet Do not fully tighten the Bolts yet Not fully fold the Frame yetTighten the Nut the Wheel must turn freely Screws for stepPage That no wires are pinched Fore tightening any of themMake sure that no wires are pinched PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power Select the user modeSelect a default user setting Set the date and timeSelect the manual mode HOW to Identify Yourself AS User 1 or UserHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired HOW to USE a Personal Trainer Workout Select a personal trainer workoutHOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal HOW to USE the Stereo Sound SystemInformation Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. PFTL95908.0 Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. PFTL95908.0 R0808A Exploded Drawing B-Model No. PFTL95908.0 R0808A Exploded Drawing C-Model No. PFTL95908.0 Exploded Drawing D-Model No. PFTL95908.0 R0808A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

485 CS specifications

The ProForm 485 CS is a versatile and compact treadmill designed to fit seamlessly into any home gym setup. This machine combines functionality with innovative features, making it an excellent choice for fitness enthusiasts seeking an effective cardio workout.

One of the standout features of the ProForm 485 CS is its folding design, which allows for easy storage when not in use. The SpaceSaver design ensures that your workout space doesn’t feel cramped, making it ideal for smaller living areas. The treadmill can be easily lifted and stored upright, allowing users to reclaim their floors after a workout.

The ProForm 485 CS is equipped with a robust 2.0 CHP motor that delivers smooth and consistent performance. This motor allows for a maximum speed of 10 mph, making it suitable for everything from brisk walking to intense running sessions. The incline function further enhances workout variability, enabling users to adjust their workout intensity by simulating uphill runs.

One of its key technologies is the ProShox cushioning system, designed to reduce impact on joints during workouts. This feature provides a more comfortable running experience, which is especially beneficial for those who may have joint concerns or are new to running. The cushioning absorbs shock and allows users to focus on their performance without the discomfort associated with harder surfaces.

The treadmill features a variety of built-in workout programs designed by certified personal trainers. With a selection of 18 different programs, users can tailor their sessions to meet their fitness goals, whether they aim to lose weight, improve cardiovascular health, or build endurance. The LCD display provides real-time feedback on speed, distance, time, calories burned, and pace, helping users track their progress.

Additionally, the ProForm 485 CS is compatible with iFit technology, which offers an expansive library of interactive workouts. iFit provides various training options that adapt to individual fitness levels, along with global workouts that let users run iconic trails around the world.

Another notable characteristic is the integrated audio system, allowing users to connect their music devices and enjoy their favorite tunes while working out. This feature enhances the exercise experience, making workouts more enjoyable and motivating.

In summary, the ProForm 485 CS is an excellent combination of design, functionality, and advanced features. Its space-saving solution, powerful motor, cushioning technology, and compatibility with iFit make it a standout choice for anyone looking to elevate their home fitness routine. Whether you are a beginner or an experienced athlete, this treadmill offers the tools needed to achieve fitness goals effectively.
Top Page Image Contents