ProForm 7 Operation and Adjustment, PRE-LUBRICATED Walking Belt, HOW to Plug in the Power Cord

Page 13

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your homeʼs power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor call the telephone number on the front cover of this man- ual.

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni- toring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc- tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

 

 

 

Surge Suppressor

 

 

 

Grounding Pin

 

Grounding Pin

2

Grounded Outlet

 

Grounding Plug

Grounded Outlet Box

 

Adapter

Surge Suppressor

 

Lug

Grounding Plug

 

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is grounded before using an adapter.

13

Image 13
Contents Model No. PCTL57809.0 Serial No QUESTIONS?Contact OUR Customer SER- Vice Department Directly Table of Contents Important Precautions Page Before YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedNut the Wheel must turn freely. Discard Bolts yet Save all six Screws for . Lift off the Pulse Support Console Assembly 109 Ground Wire Be Damaged When the Power is Again. if the Connectors are not CONThat no wires are pinched Nected PROPERLY, the Console MAYMake sure that no wires are pinched HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramSelect the user mode HOW to Turn on the PowerSet the date and time Select a default user settingHOW to USE the Manual Mode HOW to Identify Yourself AS User 1 or UserSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired Select a personal trainer workout HOW to USE a Personal Trainer WorkoutHOW to View the Fitness Journal Select the user mode. See on Reset the fitness journal HOW to Reset the Fitness JournalExit the user mode HOW to USE the Stereo Sound SystemOptional Chest Pulse Sensor Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part LIST-Model No. PCTL57809.0Key No. Qty Description Exploded Drawing A-Model No. PCTL57809.0 R0909A Exploded Drawing B-Model No. PCTL57809.0 R0909A Exploded Drawing C-Model No. PCTL57809.0 Exploded Drawing D-Model No. PCTL57809.0 R0909A Limited Warranty Ordering Replacement Parts