ProForm 7 manual Assembly

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

.

,

adjustable wrench

, scissors

, and needlenose pliers

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

M4.2 Star

M8 Star

 

M10 Star

Bolt Spacer (79)–4

 

Washer (70)–2

 

Base Pad Spacer

 

Washer (10)–4

Washer (8)–4

 

 

 

 

 

 

 

 

(104)–2

M4.2 x 19mm

M4.2 x 25mm

 

#10 x 1" Tek

M4 x 20mm

M8 x 25mm Bolt (6)–4

Screw (1)–4

Tek Screw (2)–4

Screw (76)–2

Screw (3)–2

 

 

 

M10 x 96mm Bolt (5)–4

 

6

Image 6
Contents QUESTIONS? Model No. PCTL57809.0 Serial NoContact OUR Customer SER- Vice Department Directly Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetNut the Wheel must turn freely. Discard Bolts yet Save all six Screws for . Lift off the Pulse Support Console Assembly 109 Ground Wire That no wires are pinched Again. if the Connectors are not CONBe Damaged When the Power is Nected PROPERLY, the Console MAYMake sure that no wires are pinched Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power Select the user modeSelect a default user setting Set the date and timeSelect the manual mode HOW to Identify Yourself AS User 1 or UserHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired HOW to USE a Personal Trainer Workout Select a personal trainer workoutHOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal HOW to USE the Stereo Sound SystemInformation Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. PCTL57809.0 Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. PCTL57809.0 R0909A Exploded Drawing B-Model No. PCTL57809.0 R0909A Exploded Drawing C-Model No. PCTL57809.0 Exploded Drawing D-Model No. PCTL57809.0 R0909A Ordering Replacement Parts Limited Warranty