
PART IDENTIFICATION CHART
Use the chart below to identify the small parts used in assembly. The number in parenthesis below each part is the key number of the part, from the PART LIST on page 14. The number after the dash indicates the
quantity needed for assembly. Note: Some small parts may have been
M8 x 55mm Hex Head Bolt (63)Ð2 |
| M10 x 75mm Button Head Bolt (45)Ð2 | |
M4 x 16mm Screw (51)Ð6 |
|
|
|
M6 x 1Ó Hex Head Screw (27)Ð2 | M10 x 25mm Button Head Screw (25)Ð3 | ||
M5x 12mm Screw (33)Ð4 |
|
|
|
|
| Pedal Bolt (36)Ð2 | |
|
| M10 x 150mm Carriage Bolt (32)Ð1 | |
M8 Nylon Locknut (64)Ð2 | M10 | Nylon Locknut (46)Ð2 | 1/2Ó Nylon Locknut (37)Ð2 |
1/4Ó Split Washer (62)Ð2 | M10 | Split Washer (69)Ð3 | Star Washer (29)Ð1 |
|
| 5 |
|