7.The Console (13) requires two ÒAAÓ batteries (not included). Alkaline batteries are recommended.
To install batteries, first slide up the Battery Cover (14). Carefully remove the battery clip from the Console (13). Insert two batteries into the battery clip.
Make sure that the negative ends of the batteries (marked ÒÐÓ) are touching the springs. Replace the battery clip and close the Battery Cover.
8.Make sure that all parts of the L.E.X. are properly tightened. Place a mat under the L.E.X. to protect the floor or carpet from damage.
7 | Batteries |
| 14 |
| Battery |
| Clip |
| 13 |
MAINTENANCE
Inspect and tighten all parts of the L.E.X. regularly. Replace any worn parts immediately.
For continued smooth operation of the L.E.X., the Stabilizer (4) should be kept clean. Using a soft cloth and mild detergent, clean any dust and residue that may build up where the Wheels (60) move on the Stabilizer. Other components of the L.E.X. can also be cleaned in this manner.
4 |
60 |
IMPORTANT: Never use abrasives or solvents to clean the L.E.X.. To prevent damage to the con- sole, keep liquids away from the console and keep the console out of direct sunlight.
LUBRICATING THE HANDLEBARS
If a squeaking sound is heard when the Handlebars (10, 11) are moved, a small amount of grease should be applied. Refer to the drawing below. Turn the Resistance Knob (30) counterclockwise and remove it. Remove the Star Washer (29). Using pliers, grip the head of the Carriage Bolt (32) and remove it. Apply a thin film of grease to both sides of the Handlebar Caps (28). Reattach all parts, making sure that they are in the positions shown.
| 29 | 30 |
|
| 11 |
| 32 | 28 |
|
| |
10 |
|
|
28 | Apply |
|
|
| |
| Grease | |
8