JVC LVT0870-006A manual Digital Connections, Digital input terminals, Digital output terminal

Page 16

Digital Connections

This receiver is equipped with four DIGITAL IN terminals—one digital coaxial terminal and three digital optical terminals—and one DIGITAL OUT terminal.

IMPORTANT:

When connecting a DVD player, digital TV broadcast tuner or DBS tuner using the digital terminals, you also need to connect it to the video jacks on the rear. Without connecting it to the video jacks, you can view no playback picture.

After connecting the components using the DIGITAL IN terminals, set the following correctly if necessary.

Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “6 Setting the Digital Input (DIGITAL IN) Terminals” on page 25.

Select the digital input mode correctly. For details, see “Selecting the Analog or Digital Input Mode” on page 19.

Notes:

When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

DIGITAL 1 (coaxial): For DVD player

DIGITAL 2 (optical): For CD player

DIGITAL 3 (optical): For digital TV broadcast tuner

DIGITAL 4 (optical): For CD recorder

When you want to operate the CD player, CD recorder, or MD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog Connections” (see page 9).

When you want to operate a DVD player using the AV COMPU LINK remote control system (see page 49), connect the DVD player also as described in “Analog Connections” (see page 12).

Digital input terminals

You can connect any digital equipment as follows:

Digital TV

 

 

 

 

 

 

 

 

 

 

DBS tuner

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital VCR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DBS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD player

CD player

DVD

Digital output terminal

 

 

CD recorder

 

 

MD recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital optical cable (not supplied) between digital optical terminals

 

 

CD recorder

 

 

MD recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital coaxial cable (not supplied) between digital coaxial terminals

Digital optical cable (not supplied) between digital optical terminals

When the digital recording equipment such as an MD recorder and CD recorder has a digital optical input terminal, connecting it to the DIGITAL OUT terminal enables you to perform digital-to- digital recording.

Note:

PCM/DOLBY DIGITAL /DTS

DIGITAL OUT

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal, using a digital coaxial cable (not supplied).

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD), DIGITAL 3 (TV) or DIGITAL 4 (CDR) terminal, using a digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

DIGITAL IN

DIGITAL 1 (DVD)

DIGITAL 2 (CD)

DIGITAL 3 (TV)

DIGITAL 4 (CDR)

The digital signal format output through the DIGITAL OUT terminal is the same as that of the input signal. This means that when the DTS Digital Surround signals are input, the DTS Digital Surround signals are output.

13

Image 16
Contents RX-8022PSL Page RX-8022PSL Table of Contents Features Precautions IntroductionMaster Volume control Front PanelDisplay Window STANDBY/ON button and Standby lamp Speakers ON/OFF 1 buttonRemote Control Remote control display windowBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Setting the Voltage SelectorConnecting the Speakers AM Antenna ConnectionsBest reception Typical speaker layoutBasic connecting procedure Connecting the front, center and surround speakersConnecting the surround back speakers Connecting the subwoofer speakerConnecting Audio/Video Components Enhancing your audio systemAnalog Connections Audio component connectionsCD player To audio outputCassette deck or MD recorder CD recorder To audio inputWhen attaching the cover Video component connectionsVCRs VHS/VHS VCRTV and/or DBS tuner DBS tunerDVD player When you connect a DVD player with stereo output jacksDVD player Digital input terminals Digital ConnectionsDigital output terminal Change the PC audio setting USB ConnectionLamp on the USB Audio button on the front panel lights up USB cable not suppliedConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Replace the coverTurning On the Power Before using the remote controlBasic Operations Selecting the Source to PlaySpeaker and signal indicators on the display Speaker indicators light upChanging the source name Selecting different sources for picture and soundHeadphone mode Adjusting the Volume Listening Only with HeadphonesSelecting the Front Speakers Selecting the Analog or Digital Input Mode When selecting Dgtl D.DWhen selecting Dgtl DTS Dgtl Auto appears on the displayUsing the Sleep Timer Basic adjustment auto memoryMuting the Sound Changing the Display BrightnessBasic Settings Basic ProcedureSetting the Speakers Setting the Speaker Distance Measuring unit-DIST UnitFeet Select this to set the distance in feet Speaker distance-FRONT DIST, Center CntrSetting the Bass Sounds Setting the Dynamic Range-MID NightCrossover frequency-CROSSOVER Low frequency effect attenuator-LFE ATTSetting the Component Video Input Setting the Digital Input Digital in TerminalsDigital in 1-DVD, MD**, CDR, TV or DBS* or CD Select this not to store the volume level To recall the volume levelTo cancel the One Touch Operation Source name and Surround/DSP mode appearTuning into Stations Manually Using Preset Tuning Receiving Radio BroadcastsPress FM/AM Preset 5 or ∞ Selecting the FM Reception ModeWhile listening to an FM station, press FM Mode To tune in a preset stationOperating the Tuner Using the On-Screen Display Press 5 or ∞ to move to an item you want to set or adjustStoring the preset stations Press 5 or ∞ to move to Tuner CONTROL, then press 2 orAttenuating the Input Signal Setting SoundTurning Analog Direct On and Off Reinforcing the Bass Press Bass Boost to turn on Bass Bass Boost Boost functionPress Sound Press Bass Boost to turn on BassUsing Surround Modes and DSP Modes Reproducing Theater Ambience Introducing the Surround ModesDolby Surround Movie theater At homeDVD Multi Playback Mode DTS Digital SurroundNeo6 Music DTS-ES3D Headphone Mode BehindEarly reflections Direct soundsDolby Digital EX software Dolby D EX Dolby Digital 5.1-channel softwareDTS-ES software DTS 5.1-channel software DTSPress Surround to activate Surround mode On the front panel From the remote controlActivating the Surround Modes Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the display Adjusting Sound Adjusting the Equalization Patterns Adjusting the Speaker Output Levels Select this to adjust the subwooferLevel Output levelSelect a speaker you want to adjust Press Level + or to adjust Speaker output level -10 dB toPress Level Adjust repeatedly to Down ∞ to adjust the speakerShow Effect Adjust menu see Parameter you want to adjustDown ∞ to adjust the sound Press Effect repeatedly to select aSame time Compu Link Remote Control SystemPress the play 3 button on the CD player Connections Text Compu Link Remote Control SystemFunctions On-Screen Operating buttons on the remote control Press Text Display while CD or MD is selected as the sourceOperations Showing the Disc Information on the TV ScreenPress Text Display while CD is selected as the source Press SETThen press SET Press SET againPress 5 or ∞ to move To GENRE, then Press SET Press 5 or ∞ to move To SEARCH, then Press SETEntering the Disc Information Enter the disc title, referring to steps 3 Press Text Display while MD is selected as the sourcePress 5 or ∞ to move to the genre you want, then press SET AV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection VCR connected toAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player CD changerTurntable CD recorderVCR 1 VCR connected to the VCR 1 jacks Operating Video ComponentsDVD player Enter a manufacturer’s code using buttons 1-9, Operating Other Manufacturers’ Video EquipmentPress and hold TV Press TV/DBS Release TVEnter manufacturer’s code using buttons 1-9, Press and hold CATV/DBS Press CATV/DBS ControlRelease CATV/DBS Press and hold VCR1 Press VCR1Press and hold Audio Press DVD Release AudioTroubleshooting Problem Possible Cause SolutionProblem Specifications AmplifierAudio VideoTuning Range Usable Sensitivity Signal-to-Noise Ratio FM tuner IHFAM tuner GeneralElectric shock