JVC LVT0870-006A, RX-8022PSL manual Adjusting the Equalization Patterns

Page 42

Adjusting the Equalization Patterns

—DIGITAL EQ

You can adjust the equalization patterns to your preference.

Once you have made adjustment, it is memorized for each source.

Using the on-screen display (through the remote control]:

2.Press CONTROL UP 5 or DOWN repeatedly to adjust the

frequency level.

The DIGITAL EQ indicator lights up on the display.

The frequency level changes from –8 dB to +8 dB in 2 dB steps.

CONTROL

DOWN UP

1.Show DIGITAL EQ (Equalization) menu (see page 38).

2.Press 5 or to move to the frequency you want to adjust.

3.Press 2 or 3 to adjust the frequency level you

want.

The DIGITAL EQ indicator lights up on the display.

The frequency level changes from –8 dB to +8 dB in 2 dB steps.

4.Repeat steps 2 and 3 to adjust the other frequency levels.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

To flat the equalization pattern,

set all the frequency levels to “0dB” in step 3. The DIGITAL EQ indicator goes off from the display.

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1. Press DIGITAL EQ (Equalization)

DIGITAL

LEV

repeatedly to select the frequency you

EQ

ADJU

 

 

 

 

want to adjust.

 

 

 

 

 

 

Each time you press the button, the frequency with its current level changes as follows:

EQ 63Hz EQ250Hz EQ 1kHz

and its level and its level and its level

EQ16kHz

EQ 4kHz

and its level

and its level

“0dB” is the initial setting for each frequency.

3.Repeat steps 1 and 2 to adjust the other frequency levels.

To flat the equalization pattern,

set all the frequency levels to “0dB” in step 2. The DIGITAL EQ indicator goes off from the display.

From the remote control:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1. Press SOUND.

SOUND

“SOUND” appears on the remote control display window.

The 10 keys are activated for sound adjustments.

2. Press DIGITAL EQ (Equalization)

DIGITALEQ

repeatedly to select the frequency you

10

RETURN

want to adjust.

 

“EQ” appears on the remote control display window.

Each time you press the button, the frequency with its current level changes as follows:

EQ 63Hz

 

EQ250Hz

 

 

EQ 1kHz

 

and its level

 

and its level

 

 

and its level

EQ16kHz

EQ 4kHz

 

 

 

 

and its level

and its level

• “0dB” is the initial setting for each frequency.

3. Press LEVEL + or repeatedly

+

to adjust the frequency level.

The DIGITAL EQ indicator lights up on

CH/LEVEL

the display.

The frequency level changes from

–8 dB to +8 dB in 2 dB steps.

4.Repeat steps 2 and 3 to adjust the other frequency levels.

To flat the equalization pattern,

set all the frequency levels to “0dB” in step 3. The DIGITAL EQ indicator goes off from the display.

Notes:

When Analog Direct is in use, the digital equalization patterns cannot be adjusted.

The digital equalization patterns affect the front speaker sounds only.

39

Image 42
Contents RX-8022PSL Page RX-8022PSL Table of Contents Features Precautions IntroductionDisplay Window Master Volume controlFront Panel STANDBY/ON button and Standby lamp Speakers ON/OFF 1 buttonRemote Control Remote control display windowChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Setting the Voltage SelectorBest reception Connecting the SpeakersAM Antenna Connections Typical speaker layoutConnecting the surround back speakers Basic connecting procedureConnecting the front, center and surround speakers Connecting the subwoofer speakerAnalog Connections Connecting Audio/Video ComponentsEnhancing your audio system Audio component connectionsCassette deck or MD recorder CD playerTo audio output CD recorder To audio inputVCRs When attaching the coverVideo component connections VHS/VHS VCRTV and/or DBS tuner DBS tunerWhen you connect a DVD player with stereo output jacks DVD playerDVD player Digital Connections Digital input terminalsDigital output terminal Lamp on the USB Audio button on the front panel lights up Change the PC audio settingUSB Connection USB cable not suppliedPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverBasic Operations Turning On the PowerBefore using the remote control Selecting the Source to PlayChanging the source name Speaker and signal indicators on the displaySpeaker indicators light up Selecting different sources for picture and soundAdjusting the Volume Listening Only with Headphones Headphone modeSelecting the Front Speakers When selecting Dgtl DTS Selecting the Analog or Digital Input ModeWhen selecting Dgtl D.D Dgtl Auto appears on the displayMuting the Sound Using the Sleep TimerBasic adjustment auto memory Changing the Display BrightnessBasic Settings Basic ProcedureSetting the Speakers Feet Select this to set the distance in feet Setting the Speaker DistanceMeasuring unit-DIST Unit Speaker distance-FRONT DIST, Center CntrCrossover frequency-CROSSOVER Setting the Bass SoundsSetting the Dynamic Range-MID Night Low frequency effect attenuator-LFE ATTSetting the Digital Input Digital in Terminals Setting the Component Video InputDigital in 1-DVD, MD**, CDR, TV or DBS* or CD To cancel the One Touch Operation Select this not to store the volume levelTo recall the volume level Source name and Surround/DSP mode appearTuning into Stations Manually Using Preset Tuning Receiving Radio BroadcastsWhile listening to an FM station, press FM Mode Press FM/AM Preset 5 or ∞Selecting the FM Reception Mode To tune in a preset stationStoring the preset stations Operating the Tuner Using the On-Screen DisplayPress 5 or ∞ to move to an item you want to set or adjust Press 5 or ∞ to move to Tuner CONTROL, then press 2 orSetting Sound Attenuating the Input SignalTurning Analog Direct On and Off Press Sound Reinforcing the BassPress Bass Boost to turn on Bass Bass Boost Boost function Press Bass Boost to turn on BassDolby Surround Using Surround Modes and DSP ModesReproducing Theater Ambience Introducing the Surround Modes Movie theater At homeNeo6 Music DVD Multi Playback ModeDTS Digital Surround DTS-ESEarly reflections 3D Headphone ModeBehind Direct soundsDTS-ES software Dolby Digital EX software Dolby D EXDolby Digital 5.1-channel software DTS 5.1-channel software DTSActivating the Surround Modes Press Surround to activate Surround modeOn the front panel From the remote control Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the display Adjusting Sound Adjusting the Equalization Patterns Level Adjusting the Speaker Output LevelsSelect this to adjust the subwoofer Output levelPress Level Adjust repeatedly to Select a speaker you want to adjustPress Level + or to adjust Speaker output level -10 dB to Down ∞ to adjust the speakerDown ∞ to adjust the sound Show Effect Adjust menu seeParameter you want to adjust Press Effect repeatedly to select aCompu Link Remote Control System Same timePress the play 3 button on the CD player Text Compu Link Remote Control System ConnectionsFunctions Operations On-Screen Operating buttons on the remote controlPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenThen press SET Press Text Display while CD is selected as the sourcePress SET Press SET againPress 5 or ∞ to move To SEARCH, then Press SET Press 5 or ∞ to move To GENRE, then Press SETEntering the Disc Information Press Text Display while MD is selected as the source Enter the disc title, referring to steps 3Press 5 or ∞ to move to the genre you want, then press SET Connections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection VCR connected toOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD playerCD changer CD recorderOperating Video Components VCR 1 VCR connected to the VCR 1 jacksDVD player Press and hold TV Press TV/DBS Enter a manufacturer’s code using buttons 1-9,Operating Other Manufacturers’ Video Equipment Release TVRelease CATV/DBS Enter manufacturer’s code using buttons 1-9,Press and hold CATV/DBS Press CATV/DBS Control Press and hold VCR1 Press VCR1Press and hold Audio Press DVD Release AudioTroubleshooting Problem Possible Cause SolutionProblem Audio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF GeneralElectric shock