Selecting the Analog or Digital Input
Mode
When you have connected digital source components using the digital terminals (see page 13), you need to change the input mode for these components to the appropriate digital input mode
Before you start, remember...
The digital input (DIGITAL IN) terminal setting should be correctly done for the sources you want to select the digital input mode for (see “6 Setting the Digital Input (DIGITAL IN) Terminals” on page 25). Without setting this digital input terminal correctly, you cannot change the input mode from analog input to digital input even if you follow the procedure below.
1.Press one of the source selecting
The lamp on the front panel button for the selected source lights up.
DVD MULTI | DVD | VCR 1 | VCR 2 | VIDEO | TV SOUND/DBS |
|
|
|
|
|
|
|
| DVD | DVD MULTI | CD | FM/AM |
|
|
|
|
| SOURCE NAME | VIDEO | CDR | PHONO |
|
|
|
|
| TV/DBS | |||
PHONO | CD | CDR | TAPE / MD | USB AUDIO | FM / AM |
|
|
|
|
|
|
|
| VCR 1 | VCR 2 | TAPE/MD | USB |
|
|
| SOURCE NAME |
|
|
|
|
|
On the front panel | From the remote control |
Note:
If “TAPE” has been assigned as the source name to the TAPE/MD button when using an MD recorder, it does not work in this step. To change the source name, see “Changing the source name” on page 17.
2.Press INPUT ANALOG/DIGITAL (INPUT
INPUT |
|
ANALOG/DIGITAL | ANALOG/DIGITAL |
| INPUT |
INPUT ATT |
|
On the front panel | From the remote control |
•Each time you press the button, the input mode changes as follows:
L R DGTL AUTO
DIGITAL
SPEAKERS 1 | VOLUME |
DGTL AUTO 
ANALOG
(Digital)
DGTL AUTO: Select this for the digital input mode. The receiver automatically detects the incoming signals.
The DGTL AUTO indicator lights up on the display, and the digital signal format indicators for the detected signals also light up.
ANALOG: Select this for the analog input mode. The ANALOG indicator lights up.
When selecting “DGTL AUTO,” the following indicators showing detected signals light up on the display.
LINEAR PCM : Lights up when Linear PCM signals come in.
LINEAR PCM : Lights up when the digital signals are not recognized.
DIGITAL : Lights up when Dolby Digital or Dolby Digital EX signals come in.
:Lights up when DTS Digital Surround or
When playing a software encoded with the Dolby Digital or DTS
Digital Surround, the following symptoms may occur:
•Sound does not come out at the beginning of playback.
•Noise comes out while chapters or tracks are being searched for or skipped over.
1.Press INPUT ANALOG/DIGITAL (INPUT ATT) or ANALOG/DIGITAL INPUT on the remote control.
• “DGTL AUTO” appears on the display.
2.Press CONTROL UP 5 or DOWN ∞ on the front panel to select “DGTL D.D” or “DGTL DTS” while “DGTL AUTO” still remains on the display.
•Each time you press the button, the input mode changes as follows:
L | R | DGTL | AUTO |
DIGITAL |
|
|
|
SPEAKERS 1 |
| VOLUME | |
DGTL AUTO |
| DGTL D.D |
|
|
| ||
(Digital) | (Digital Dolby Digital) | ||
DGTL DTS
(Digital)
When selecting “DGTL D.D” or “DGTL DTS,” the following indicators showing detected signals light up on the display.
DGTL | : Always lights up. |
When selecting “DGTL D.D”
DIGITAL : • Lights up when Dolby Digital signals come in.
•The frame flashes when Dolby Digital signals are not recognized.
When selecting “DGTL DTS”
: • Lights up when DTS Digital Surround signals come in.
•The frame flashes when DTS Digital Surround signals are not recognized.
Note:
When you turn off the power or select another source, “DGTL D.D” and “DGTL DTS” settings are canceled and the digital input mode is automatically reset to “DGTL AUTO.”
19