JVC LVT0870-006A Select a speaker you want to adjust, +10 dB, Press Level Adjust repeatedly to

Page 44
∗SUBWFR
6

From the remote control:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

Adjustment is also possible without outputting the test tone. In this case, you can skip steps 2 and 6 below.

1. Press SOUND.

SOUND

5.Press SOUND again then repeat steps 3 and 4 to adjust the other speakers output levels.

6.Press TEST again to stop the test tone.

SOUND

TEST

4

“SOUND” appears on the remote control display window.

• The 10 keys are activated for sound adjustments.

2.Press TEST to check if you can hear the sounds through all the speakers at equal level.

TEST

4

Notes:

•If you have selected “NO” or “NONE” for a speaker (see page 22),

test tone does not come out of the corresponding speaker.

• Subwoofer output level cannot be adjusted when outputting test tone. When you adjust the subwoofer output level, press SOUND, SUBWFR then LEVEL + or – to adjust the speaker output level (–10 dB to +10 dB). (“S-WFR” appears on the

A test tone comes out of the speakers (only if the speakers are activated) in the following order:

FRNT L (Left front speaker) = CENTER (Center speaker) = FRNT R (Right front speaker) =

SURR R (Right surround speaker) =

SBK R (Right surround back speaker)* =

SBK L (Left surround back speaker) or

S BACK (surround back speaker)*

=

SURR L (Left surround speaker) = (Back to the beginning)

*If you have selected “1SPK” for the surround back speaker (see page 22), “S BACK” appears instead of “SBK L” and “SBK R.” No test tone outputs from the right surround back speaker.

3.Select a speaker you want to adjust.

The selected speaker name appears on

 

∗FRONT•L ∗FRONT•R

 

the remote control display window for

 

 

2

3

a while.

 

 

MENU

•

To select the left front speaker, press

 

∗CENTER ∗SUBWFR

 

5

6

 

FRONT•L. “FRL” appears on the

 

 

 

ENTER

 

remote control display window.

 

∗SURR•L

∗SURR•R

 

 

8

9

•

To select the center speaker, press

 

Q

∗SBACK•L

∗SBACK•R

 

CENTER. “CTR” appears on the

 

 

0

+10

 

remote control display window.

 

FMMODE

100+

•To select the right front speaker, press FRONT•R. “FRR” appears on the remote control display window.

•To select the right surround speaker, press SURR•R.

“SURRR” appears on the remote control display window.

•To select the right surround back speaker, press SBACK•R. “SBKR” appears on the remote control display window.

•To select the left surround back speaker, press SBACK•L. “SBKL” appears on the remote control display window.

•To select the left surround speaker, press SURR•L. “SURRL” appears on the remote control display window.

Note:

If you have selected “1SPK” for the surround back speaker (see page 22), press SBACK•L to adjust the surround back speaker output level.

4. Press LEVEL + or – to adjust the

+

speaker output level (–10 dB to

CH/∗LEVEL

+10 dB).

−

remote control display window.)

It is recommended to make adjustments while listening to the sound of the source played back.

•Test tone does not output through the speakers when selecting

DVD MULTI.

On the front panel:

You can also use the buttons on the front panel to adjust the speaker output levels. However, no test tone is available when using the buttons on the front panel. So make adjustments while listening to the sound of the source played back.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1. Press LEVEL ADJUST repeatedly to

L

LEVEL

select a speaker you want to adjust.

 

ADJUST

 

 

 

 

• Each time you press the button, the items change

 

 

 

 

as follows.

 

 

SUBWFR (Subwoofer) = FRNT L (Left front speaker) = CENTER (Center speaker) = FRNT R (Right front speaker) = SURR R (Right surround speaker) =

SBK R (Right surround back speaker)* =

SBK L (Left surround back speaker) or

 

S BACK (surround back speaker)*

=

SURR L (Left surround speaker) = (Back to the beginning)

*If you have selected “1SPK” for the surround back speaker (see page 22), “S BACK” appears instead of “SBK L” and “SBK R.”

2. Press CONTROL UP 5 or

CONTROL

DOWN ∞ to adjust the speaker

DOWN UP

 

output level (–10 dB to +10 dB).

 

3.Repeat steps 1 and 2 to adjust the other speakers output levels.

41

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-8022PSL Page RX-8022PSL Table of Contents Features Precautions IntroductionMaster Volume control Front PanelDisplay Window STANDBY/ON button and Standby lamp Speakers ON/OFF 1 buttonRemote Control Remote control display windowBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Setting the Voltage SelectorConnecting the Speakers AM Antenna ConnectionsBest reception Typical speaker layoutBasic connecting procedure Connecting the front, center and surround speakersConnecting the surround back speakers Connecting the subwoofer speakerConnecting Audio/Video Components Enhancing your audio systemAnalog Connections Audio component connectionsCD player To audio outputCassette deck or MD recorder CD recorder To audio inputWhen attaching the cover Video component connectionsVCRs VHS/VHS VCRTV and/or DBS tuner DBS tunerDVD player When you connect a DVD player with stereo output jacksDVD player Digital output terminal Digital ConnectionsDigital input terminals Change the PC audio setting USB ConnectionLamp on the USB Audio button on the front panel lights up USB cable not suppliedConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Replace the coverTurning On the Power Before using the remote controlBasic Operations Selecting the Source to PlaySpeaker and signal indicators on the display Speaker indicators light upChanging the source name Selecting different sources for picture and soundSelecting the Front Speakers Adjusting the Volume Listening Only with HeadphonesHeadphone mode Selecting the Analog or Digital Input Mode When selecting Dgtl D.DWhen selecting Dgtl DTS Dgtl Auto appears on the displayUsing the Sleep Timer Basic adjustment auto memoryMuting the Sound Changing the Display BrightnessBasic Settings Basic ProcedureSetting the Speakers Setting the Speaker Distance Measuring unit-DIST UnitFeet Select this to set the distance in feet Speaker distance-FRONT DIST, Center CntrSetting the Bass Sounds Setting the Dynamic Range-MID NightCrossover frequency-CROSSOVER Low frequency effect attenuator-LFE ATTDigital in 1-DVD, MD**, CDR, TV or DBS* or CD Setting the Digital Input Digital in TerminalsSetting the Component Video Input Select this not to store the volume level To recall the volume levelTo cancel the One Touch Operation Source name and Surround/DSP mode appearTuning into Stations Manually Using Preset Tuning Receiving Radio BroadcastsPress FM/AM Preset 5 or ∞ Selecting the FM Reception ModeWhile listening to an FM station, press FM Mode To tune in a preset stationOperating the Tuner Using the On-Screen Display Press 5 or ∞ to move to an item you want to set or adjustStoring the preset stations Press 5 or ∞ to move to Tuner CONTROL, then press 2 orTurning Analog Direct On and Off Setting SoundAttenuating the Input Signal Reinforcing the Bass Press Bass Boost to turn on Bass Bass Boost Boost functionPress Sound Press Bass Boost to turn on BassUsing Surround Modes and DSP Modes Reproducing Theater Ambience Introducing the Surround ModesDolby Surround Movie theater At homeDVD Multi Playback Mode DTS Digital SurroundNeo6 Music DTS-ES3D Headphone Mode BehindEarly reflections Direct soundsDolby Digital EX software Dolby D EX Dolby Digital 5.1-channel softwareDTS-ES software DTS 5.1-channel software DTSPress Surround to activate Surround mode On the front panel From the remote controlActivating the Surround Modes Activating the DSP ModesPress DVD Multi so that DVD Multi appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Adjusting Sound Adjusting the Equalization Patterns Adjusting the Speaker Output Levels Select this to adjust the subwooferLevel Output levelSelect a speaker you want to adjust Press Level + or to adjust Speaker output level -10 dB toPress Level Adjust repeatedly to Down ∞ to adjust the speakerShow Effect Adjust menu see Parameter you want to adjustDown ∞ to adjust the sound Press Effect repeatedly to select aPress the play 3 button on the CD player Compu Link Remote Control SystemSame time Functions Text Compu Link Remote Control SystemConnections On-Screen Operating buttons on the remote control Press Text Display while CD or MD is selected as the sourceOperations Showing the Disc Information on the TV ScreenPress Text Display while CD is selected as the source Press SETThen press SET Press SET againEntering the Disc Information Press 5 or ∞ to move To SEARCH, then Press SETPress 5 or ∞ to move To GENRE, then Press SET Press 5 or ∞ to move to the genre you want, then press SET Press Text Display while MD is selected as the sourceEnter the disc title, referring to steps 3 AV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection VCR connected toAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player CD changerTurntable CD recorderDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks Enter a manufacturer’s code using buttons 1-9, Operating Other Manufacturers’ Video EquipmentPress and hold TV Press TV/DBS Release TVEnter manufacturer’s code using buttons 1-9, Press and hold CATV/DBS Press CATV/DBS ControlRelease CATV/DBS Press and hold VCR1 Press VCR1Press and hold Audio Press DVD Release AudioTroubleshooting Problem Possible Cause SolutionProblem Specifications AmplifierAudio VideoTuning Range Usable Sensitivity Signal-to-Noise Ratio FM tuner IHFAM tuner GeneralElectric shock
Top Page Image Contents