JVC LVT0870-006A, RX-8022PSL manual Basic Settings, Basic Procedure

Basic Settings

Some of the following settings are required after connecting and positioning your speakers while others will make operations easier.

•When performing the basic settings, it is recommended to use the remote control so that you can show the on-screen display on the TV.

•When using the buttons on the front panel, you can perform the same settings. (The following on-screen display cannot be shown if you use the buttons on the front panel.)

•The on-screen display will disappear if no operation is done for about 1 minute.

Basic Procedure

Ex. When setting the subwoofer information

Using the on-screen display (through the remote control):

On the front panel:

1. Press MENU.

The MENU screen appears on the TV.

MENU PLAY EXIT

/REW PAUSE FF/

SET

DOWN – TUNING – UP

STOP CONTROL

On-screen operating

buttons

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1. Press SETTING repeatedly until SETTING

“SUB WOOFER” appears on the display.

Each time you press the button, the setting items change as follows.

•For details about each setting item (1 to 9), see pages 22 to 26.

2. Press 5 or ∞ to move to “SETTING,” then press 2 or 3.

SETTING 1 menu showing setting items appears on the TV.

•The item pointed by is also shown on the display on the unit.

3.Press 5 or ∞ to move to “SUBWOOFER.”

•To go to the next screen, press ∞ continuously.

•To go back to the previous screen, press 5 continuously.

3 1

	4
2	5
SETTING 1 menu	SETTING 2 menu

6

7

8

9

SETTING 3 menu

For details about each setting item (1 to 9), see pages 22 to 26.

4. Press 2 or 3 to select a setting you want to use.

In this example, the subwoofer information is set to “YES” to output bass sound through the subwoofer.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

21

ANALOG	L	R
	SPEAKERS 1		VOLUME

SUB WOOFER:NO (1)	FRONT SPK:LARGE (1)
CNTR SPK:SMALL (1)	SURR SPK:SMALL (1)
SBACK SPK:SMALL (1)	SBACK OUT:2SPK (1)
SURR CH:SURR (1)	EX/ES:AUTO (2)
DIST UNIT:meter (3)	FRONT DIST:3.0m (3)
CNTR DIST:3.0m (3)	SURR DIST:3.0m (3)
SBACK DIST:3.0m (3)	CROSS OVER:100Hz (4)
LFE ATT:0dB (4)	MID NIGHT:OFF (5)
DGTL COAX 1:DVD (6)	2:CD 3:TV 4:CDR (6)
VIDEO DVD:S/C (7)	VIDEO DBS:S/C (7)
ONE TOUCH:OFF (8)	FL DISP:TEXT (9)
(Back to the beginning)

2. Press CONTROL UP 5 or				CONTROL
				DOWN UP
	DOWN ∞ to select a setting you
	want to use.
	In this example, the subwoofer information is
	set to “YES” to output bass sound through the
	subwoofer.
			L R
		ANALOG
			SUBWFR
			SPEAKERS 1	VOLUME

NOTICE—

•Items shown on the on-screen display and on the front panel display in this section are initial values when shipped from the factory.

•Some of the items cannot be shown or cannot be adjusted according to currently selected settings. (For details, see the respective explanation.)