JVC RX-8022PSL manual Adjusting the Speaker Output Levels, Select this to adjust the subwoofer

Page 43

Adjusting the Speaker Output Levels

—LEVEL ADJUST

You can adjust the speaker output levels. The test tone can be also output from each speaker except subwoofer to check the output level balance when using the Surround mode.

•Once you have made adjustment, it is memorized for each source.

•When using the buttons on the front panel to adjust output level for the Surround mode, no test tone is available.

7Adjustable speakers

You can adjust the following speakers’ output levels within the range of –10 dB to +10 dB (“0 dB” is the initial setting):

SUBWFR

: Select this to adjust the subwoofer

 

output level.

FRONT L (FRNT L) : Select this to adjust the left front

 

speaker output level.

CENTER

: Select this to adjust the center

 

speaker output level.

 

 

FRONT R (FRNT R): Select this to adjust the right front

 

speaker output level.

SURR R

: Select this to adjust the right

 

surround speaker output level.

 

 

S BACK R (SBK R) * : Select this to adjust the right surround back speaker output level.

S BACK L (SBK L) : Select this to adjust the left surround

or S BACK*

back speaker output level.

SURR L

: Select this to adjust the left surround

 

speaker output level.

 

 

Notes:

*If you have selected “1SPK” for the surround back speaker (see page 22), “S BACK” appears instead of “S BACK (SBK) L” and “S BACK (SBK) R.” No test tone outputs from the right surround back speaker.

•If you have selected “NO” or “NONE” for a speaker (see page 22), the output level for the corresponding speaker cannot be adjustable.

•The center and left and right surround speakers’ output levels are adjustable for DVD MULTI playback mode, even though “NONE” is selected for the speaker settings.

•Speaker output levels except that of the subwoofer are not adjustable when Analog Direct is in use.

Using the on-screen display (through the remote control]:

Adjustment is also possible without outputting the test tone. In this case, you can skip steps 2, 3 and 7 below.

1. Show LEVEL ADJUST menu (see page 38).

2.Press 5 or ∞ to move to “TEST TONE.”

3.Press 2 or 3 to select “ON” to check if you can hear the sounds through all the speakers at equal

level.

A test tone comes out of the speakers (only if the speakers are activated) in the following order:

FRONT L (Left front speaker) = CENTER (Center speaker) =

FRONT R (Right front speaker)

=

SURR R (Right surround speaker)

=

S BACK R (Right surround back speaker)*

=

S BACK L (Left surround back speaker) or

 

S BACK (Surround back speaker)*

=

SURR L (Left surround speaker) = (Back to the beginning)

*If you have selected “1SPK” for the surround back speaker (see page 22), “S BACK” appears instead of “S BACK L” and

“S BACK R.” No test tone outputs from the right surround back speaker.

4.Press 5 or ∞ to move to a speaker you want to adjust.

5.Press 2 or 3 to adjust the speaker output level (–10 dB to +10 dB).

6.Repeat steps 4 and 5 to adjust the other speakers output levels.

7.After the adjustment is finished, press 5 or ∞ to

move to “TEST TONE,” then select “OFF.”

8.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Notes:

•If you have selected “NO” or “NONE” for a speaker (see page 22), test tone does not come out of the corresponding speaker.

•Subwoofer output level cannot be adjusted when outputting test tone. When you adjust the subwoofer output level, select “OFF” for “TEST TONE.”

•Test tone does not output through the speakers when selecting

DVD MULTI.

40

Page 42 Page 44
Image 43
Page 42 Page 44
Contents RX-8022PSL Page RX-8022PSL Table of Contents Introduction Features PrecautionsSTANDBY/ON button and Standby lamp Speakers ON/OFF 1 button Master Volume controlFront Panel Display WindowRemote control display window Remote ControlSetting the Voltage Selector Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesTypical speaker layout Connecting the SpeakersAM Antenna Connections Best receptionConnecting the subwoofer speaker Basic connecting procedureConnecting the front, center and surround speakers Connecting the surround back speakersAudio component connections Connecting Audio/Video ComponentsEnhancing your audio system Analog ConnectionsCD recorder To audio input CD playerTo audio output Cassette deck or MD recorderVHS/VHS VCR When attaching the coverVideo component connections VCRsDBS tuner TV and/or DBS tunerDVD player When you connect a DVD player with stereo output jacksDVD player Digital input terminals Digital ConnectionsDigital output terminal USB cable not supplied Change the PC audio settingUSB Connection Lamp on the USB Audio button on the front panel lights upReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning On the PowerBefore using the remote control Basic OperationsSelecting different sources for picture and sound Speaker and signal indicators on the displaySpeaker indicators light up Changing the source nameHeadphone mode Adjusting the Volume Listening Only with HeadphonesSelecting the Front Speakers Dgtl Auto appears on the display Selecting the Analog or Digital Input ModeWhen selecting Dgtl D.D When selecting Dgtl DTSChanging the Display Brightness Using the Sleep TimerBasic adjustment auto memory Muting the SoundBasic Procedure Basic SettingsSetting the Speakers Speaker distance-FRONT DIST, Center Cntr Setting the Speaker DistanceMeasuring unit-DIST Unit Feet Select this to set the distance in feetLow frequency effect attenuator-LFE ATT Setting the Bass SoundsSetting the Dynamic Range-MID Night Crossover frequency-CROSSOVERSetting the Component Video Input Setting the Digital Input Digital in TerminalsDigital in 1-DVD, MD**, CDR, TV or DBS* or CD Source name and Surround/DSP mode appear Select this not to store the volume levelTo recall the volume level To cancel the One Touch OperationReceiving Radio Broadcasts Tuning into Stations Manually Using Preset TuningTo tune in a preset station Press FM/AM Preset 5 or ∞Selecting the FM Reception Mode While listening to an FM station, press FM ModePress 5 or ∞ to move to Tuner CONTROL, then press 2 or Operating the Tuner Using the On-Screen DisplayPress 5 or ∞ to move to an item you want to set or adjust Storing the preset stationsAttenuating the Input Signal Setting SoundTurning Analog Direct On and Off Press Bass Boost to turn on Bass Reinforcing the BassPress Bass Boost to turn on Bass Bass Boost Boost function Press SoundMovie theater At home Using Surround Modes and DSP ModesReproducing Theater Ambience Introducing the Surround Modes Dolby SurroundDTS-ES DVD Multi Playback ModeDTS Digital Surround Neo6 MusicDirect sounds 3D Headphone ModeBehind Early reflectionsDTS 5.1-channel software DTS Dolby Digital EX software Dolby D EXDolby Digital 5.1-channel software DTS-ES softwareActivating the DSP Modes Press Surround to activate Surround modeOn the front panel From the remote control Activating the Surround ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the display Adjusting Sound Adjusting the Equalization Patterns Output level Adjusting the Speaker Output LevelsSelect this to adjust the subwoofer LevelDown ∞ to adjust the speaker Select a speaker you want to adjustPress Level + or to adjust Speaker output level -10 dB to Press Level Adjust repeatedly toPress Effect repeatedly to select a Show Effect Adjust menu seeParameter you want to adjust Down ∞ to adjust the soundSame time Compu Link Remote Control SystemPress the play 3 button on the CD player Connections Text Compu Link Remote Control SystemFunctions Showing the Disc Information on the TV Screen On-Screen Operating buttons on the remote controlPress Text Display while CD or MD is selected as the source OperationsPress SET again Press Text Display while CD is selected as the sourcePress SET Then press SETPress 5 or ∞ to move To GENRE, then Press SET Press 5 or ∞ to move To SEARCH, then Press SETEntering the Disc Information Enter the disc title, referring to steps 3 Press Text Display while MD is selected as the sourcePress 5 or ∞ to move to the genre you want, then press SET VCR connected to AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionOne-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlaySound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD recorder CD playerCD changer TurntableVCR 1 VCR connected to the VCR 1 jacks Operating Video ComponentsDVD player Release TV Enter a manufacturer’s code using buttons 1-9,Operating Other Manufacturers’ Video Equipment Press and hold TV Press TV/DBSPress and hold VCR1 Press VCR1 Enter manufacturer’s code using buttons 1-9,Press and hold CATV/DBS Press CATV/DBS Control Release CATV/DBSRelease Audio Press and hold Audio Press DVDProblem Possible Cause Solution TroubleshootingProblem Video SpecificationsAmplifier AudioGeneral Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF AM tunerElectric shock
Top Page Image Contents