JVC RX-8022PSL, LVT0870-006A Show Effect Adjust menu see, Press Effect repeatedly to select a

Page 45

Adjusting the Sound Parameters for the

Surround and DSP Modes—EFFECT ADJUST

You can adjust the Surround and DSP sound parameters to your preference.

•Once you have made adjustment, it is memorized for each source.

7Adjustable parameters

You can adjust the following parameters:

For Surround, DAP, JVC Theater Surround and All Channel Stereo modes (when the center speaker is connected)

CENTER TONE

: Adjust the center tone. As the number

(CTR TONE)

increases, the dialogue becomes clearer so

 

that the human voices change from soft to

 

sharp. (Normally select “3.” Adjustable range:

 

1 to 5)

 

 

For DAP modes and JVC Theater Surround

EFFECT LEVEL : Adjust the DAP effect level. As the

(EFFECT) number increases, the DAP effect becomes stronger. (Normally select “3.” Adjustable range: 1 to 5)

ROOM SIZE

: Adjust the virtual room size. As the

(ROOMSIZE)

number increases, the interval between

 

reflections increases so that you will feel

 

as if you were in a larger room. (Normally

 

select “3.” Adjustable range: 1 to 5)

 

 

LIVENESS

: Adjust the liveness effect. As the number

 

increases, the attenuation level of

 

reflections over time decreases so that

 

acoustics change from “Dead” to “Live.”

 

(Normally select “3.” Adjustable range: 1 to 5)

 

 

Note:

You can only adjust the Effect Level when using a DAP mode with the 3D-PHONIC indicator lights up.

For Pro Logic II Music only

PANORAMA

: Select “ON” to add “wraparound” sound

(PNRAMA)

effect with side-wall image. (Initial

control

setting: “OFF”)

 

 

CENTER WIDTH : Adjust the center channel localization

(CWIDTH) between the center speaker and the left/ right speakers. As the number increases, the center channel sound moves toward the left and right speakers. (Normally select “3.” Adjustable range: OFF and 1 to 7)

DIMENSION

: Adjust sound localization position. As the

 

number increases, the sound localization

 

moves towards forward from backward.

 

(Normally select “4.” Adjustable range: 1 to 7)

 

 

 

Using the on-screen display (through the remote control]:

1. Show EFFECT ADJUST menu (see page 38).

Parameters that are not adjustable for the currently selected Surround and DSP modes are skipped.

2.Press 5 or ∞ to move to a parameter you want to adjust.

3.Press 2 or 3 to adjust the parameter.

4.Repeat steps 2 and 3 to adjust the other parameters.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1. Press EFFECT repeatedly to select a

EFFECT SETT

parameter you want to adjust.

 

 

 

 

•Each time you press the button, the items change as follows:

EFFECT = ROOMSIZE = LIVENESS =

CTR (center) TONE = PNRAMA (Panorama) = C (center) WIDTH = DIMENSION =

(Back to the beginning)

Parameters that are not adjustable for the currently selected Surround and DSP modes are skipped.

2. Press CONTROL UP 5 or

CONTROL

DOWN UP

DOWN ∞ to adjust the sound

 

parameter.

 

3.Repeat steps 1 and 2 to adjust the other parameters.

Note:

Parameters that are not adjustable for the currently selected Surround

and DSP modes are skipped.

42

Page 44 Page 46
Image 45
Page 44 Page 46
Contents RX-8022PSL Page RX-8022PSL Table of Contents Introduction Features PrecautionsFront Panel Master Volume controlDisplay Window STANDBY/ON button and Standby lamp Speakers ON/OFF 1 buttonRemote control display window Remote ControlConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Setting the Voltage SelectorAM Antenna Connections Connecting the SpeakersBest reception Typical speaker layoutConnecting the front, center and surround speakers Basic connecting procedureConnecting the surround back speakers Connecting the subwoofer speakerEnhancing your audio system Connecting Audio/Video ComponentsAnalog Connections Audio component connectionsTo audio output CD playerCassette deck or MD recorder CD recorder To audio inputVideo component connections When attaching the coverVCRs VHS/VHS VCRDBS tuner TV and/or DBS tunerWhen you connect a DVD player with stereo output jacks DVD playerDVD player Digital Connections Digital input terminalsDigital output terminal USB Connection Change the PC audio settingLamp on the USB Audio button on the front panel lights up USB cable not suppliedPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverBefore using the remote control Turning On the PowerBasic Operations Selecting the Source to PlaySpeaker indicators light up Speaker and signal indicators on the displayChanging the source name Selecting different sources for picture and soundAdjusting the Volume Listening Only with Headphones Headphone modeSelecting the Front Speakers When selecting Dgtl D.D Selecting the Analog or Digital Input ModeWhen selecting Dgtl DTS Dgtl Auto appears on the displayBasic adjustment auto memory Using the Sleep TimerMuting the Sound Changing the Display BrightnessBasic Procedure Basic SettingsSetting the Speakers Measuring unit-DIST Unit Setting the Speaker DistanceFeet Select this to set the distance in feet Speaker distance-FRONT DIST, Center CntrSetting the Dynamic Range-MID Night Setting the Bass SoundsCrossover frequency-CROSSOVER Low frequency effect attenuator-LFE ATTSetting the Digital Input Digital in Terminals Setting the Component Video InputDigital in 1-DVD, MD**, CDR, TV or DBS* or CD To recall the volume level Select this not to store the volume levelTo cancel the One Touch Operation Source name and Surround/DSP mode appearReceiving Radio Broadcasts Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Press FM/AM Preset 5 or ∞While listening to an FM station, press FM Mode To tune in a preset stationPress 5 or ∞ to move to an item you want to set or adjust Operating the Tuner Using the On-Screen DisplayStoring the preset stations Press 5 or ∞ to move to Tuner CONTROL, then press 2 orSetting Sound Attenuating the Input SignalTurning Analog Direct On and Off Press Bass Boost to turn on Bass Bass Boost Boost function Reinforcing the BassPress Sound Press Bass Boost to turn on BassReproducing Theater Ambience Introducing the Surround Modes Using Surround Modes and DSP ModesDolby Surround Movie theater At homeDTS Digital Surround DVD Multi Playback ModeNeo6 Music DTS-ESBehind 3D Headphone ModeEarly reflections Direct soundsDolby Digital 5.1-channel software Dolby Digital EX software Dolby D EXDTS-ES software DTS 5.1-channel software DTSOn the front panel From the remote control Press Surround to activate Surround modeActivating the Surround Modes Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the display Adjusting Sound Adjusting the Equalization Patterns Select this to adjust the subwoofer Adjusting the Speaker Output LevelsLevel Output levelPress Level + or to adjust Speaker output level -10 dB to Select a speaker you want to adjustPress Level Adjust repeatedly to Down ∞ to adjust the speakerParameter you want to adjust Show Effect Adjust menu seeDown ∞ to adjust the sound Press Effect repeatedly to select aCompu Link Remote Control System Same timePress the play 3 button on the CD player Text Compu Link Remote Control System ConnectionsFunctions Press Text Display while CD or MD is selected as the source On-Screen Operating buttons on the remote controlOperations Showing the Disc Information on the TV ScreenPress SET Press Text Display while CD is selected as the sourceThen press SET Press SET againPress 5 or ∞ to move To SEARCH, then Press SET Press 5 or ∞ to move To GENRE, then Press SETEntering the Disc Information Press Text Display while MD is selected as the source Enter the disc title, referring to steps 3Press 5 or ∞ to move to the genre you want, then press SET Connections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connection VCR connected toAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierCD changer CD playerTurntable CD recorderOperating Video Components VCR 1 VCR connected to the VCR 1 jacksDVD player Operating Other Manufacturers’ Video Equipment Enter a manufacturer’s code using buttons 1-9,Press and hold TV Press TV/DBS Release TVPress and hold CATV/DBS Press CATV/DBS Control Enter manufacturer’s code using buttons 1-9,Release CATV/DBS Press and hold VCR1 Press VCR1Release Audio Press and hold Audio Press DVDProblem Possible Cause Solution TroubleshootingProblem Amplifier SpecificationsAudio VideoFM tuner IHF Tuning Range Usable Sensitivity Signal-to-Noise RatioAM tuner GeneralElectric shock
Top Page Image Contents