JVC RX-8022PSL FM tuner IHF, AM tuner, Tuning Range Usable Sensitivity Signal-to-Noise Ratio

Page 63

FM tuner (IHF)

Tuning Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal-to-Noise Ratio (IHF-A weighted):

Total Harmonic Distortion:

Stereo Separation at REC OUT:

Alternate Channel Selectivity:

Frequency Response:

AM tuner

Tuning Range:

Usable Sensitivity:

Signal-to-Noise Ratio:

General

Power Requirements:

Power Consumption:

Dimensions (W x H x D):

Mass:

87.50 MHz to 108.00 MHz

Monaural:

12.8 dBf (1.2 µV/75 )

Monaural:

21.3 dBf (3.2 µV/75 )

Stereo:

41.3 dBf (31.5 µV/75 )

Monaural:

78 dB at 85 dBf

Stereo:

73 dB at 85 dBf

Monaural:

0.4% at 1 kHz

Stereo:

0.6% at 1 kHz

35 dB at 1 kHz

 

45 dB: (±400 kHz)

 

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

522 kHz to 1 629 kHz

Loop antenna

400 µV/m

 

50 dB (100 mV/m)

AC 110 V/127 V/220 V/230 V – 240V , adjustable with the voltage selector, 50 Hz/60 Hz

210 W (at operation)

2 W (in standby mode)

435 mm x 156.5 mm x 425 mm

11.8 kg

Designs & specifications are subject to change without notice.

60

Image 63
Contents RX-8022PSL Page RX-8022PSL Table of Contents Introduction Features PrecautionsSTANDBY/ON button and Standby lamp Speakers ON/OFF 1 button Master Volume controlFront Panel Display WindowRemote control display window Remote ControlSetting the Voltage Selector Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesTypical speaker layout Connecting the SpeakersAM Antenna Connections Best receptionConnecting the subwoofer speaker Basic connecting procedureConnecting the front, center and surround speakers Connecting the surround back speakersAudio component connections Connecting Audio/Video ComponentsEnhancing your audio system Analog ConnectionsCD recorder To audio input CD playerTo audio output Cassette deck or MD recorderVHS/VHS VCR When attaching the coverVideo component connections VCRsDBS tuner TV and/or DBS tunerWhen you connect a DVD player with stereo output jacks DVD playerDVD player Digital Connections Digital input terminalsDigital output terminal USB cable not supplied Change the PC audio settingUSB Connection Lamp on the USB Audio button on the front panel lights upReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning On the PowerBefore using the remote control Basic OperationsSelecting different sources for picture and sound Speaker and signal indicators on the displaySpeaker indicators light up Changing the source nameAdjusting the Volume Listening Only with Headphones Headphone modeSelecting the Front Speakers Dgtl Auto appears on the display Selecting the Analog or Digital Input ModeWhen selecting Dgtl D.D When selecting Dgtl DTSChanging the Display Brightness Using the Sleep TimerBasic adjustment auto memory Muting the SoundBasic Procedure Basic SettingsSetting the Speakers Speaker distance-FRONT DIST, Center Cntr Setting the Speaker DistanceMeasuring unit-DIST Unit Feet Select this to set the distance in feetLow frequency effect attenuator-LFE ATT Setting the Bass SoundsSetting the Dynamic Range-MID Night Crossover frequency-CROSSOVERSetting the Digital Input Digital in Terminals Setting the Component Video InputDigital in 1-DVD, MD**, CDR, TV or DBS* or CD Source name and Surround/DSP mode appear Select this not to store the volume levelTo recall the volume level To cancel the One Touch OperationReceiving Radio Broadcasts Tuning into Stations Manually Using Preset TuningTo tune in a preset station Press FM/AM Preset 5 or ∞Selecting the FM Reception Mode While listening to an FM station, press FM ModePress 5 or ∞ to move to Tuner CONTROL, then press 2 or Operating the Tuner Using the On-Screen DisplayPress 5 or ∞ to move to an item you want to set or adjust Storing the preset stationsSetting Sound Attenuating the Input SignalTurning Analog Direct On and Off Press Bass Boost to turn on Bass Reinforcing the BassPress Bass Boost to turn on Bass Bass Boost Boost function Press SoundMovie theater At home Using Surround Modes and DSP ModesReproducing Theater Ambience Introducing the Surround Modes Dolby SurroundDTS-ES DVD Multi Playback ModeDTS Digital Surround Neo6 MusicDirect sounds 3D Headphone ModeBehind Early reflectionsDTS 5.1-channel software DTS Dolby Digital EX software Dolby D EXDolby Digital 5.1-channel software DTS-ES softwareActivating the DSP Modes Press Surround to activate Surround modeOn the front panel From the remote control Activating the Surround ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the display Adjusting Sound Adjusting the Equalization Patterns Output level Adjusting the Speaker Output LevelsSelect this to adjust the subwoofer LevelDown ∞ to adjust the speaker Select a speaker you want to adjustPress Level + or to adjust Speaker output level -10 dB to Press Level Adjust repeatedly toPress Effect repeatedly to select a Show Effect Adjust menu seeParameter you want to adjust Down ∞ to adjust the soundCompu Link Remote Control System Same timePress the play 3 button on the CD player Text Compu Link Remote Control System ConnectionsFunctions Showing the Disc Information on the TV Screen On-Screen Operating buttons on the remote controlPress Text Display while CD or MD is selected as the source OperationsPress SET again Press Text Display while CD is selected as the sourcePress SET Then press SETPress 5 or ∞ to move To SEARCH, then Press SET Press 5 or ∞ to move To GENRE, then Press SETEntering the Disc Information Press Text Display while MD is selected as the source Enter the disc title, referring to steps 3Press 5 or ∞ to move to the genre you want, then press SET VCR connected to AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionOne-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlaySound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD recorder CD playerCD changer TurntableOperating Video Components VCR 1 VCR connected to the VCR 1 jacksDVD player Release TV Enter a manufacturer’s code using buttons 1-9,Operating Other Manufacturers’ Video Equipment Press and hold TV Press TV/DBSPress and hold VCR1 Press VCR1 Enter manufacturer’s code using buttons 1-9,Press and hold CATV/DBS Press CATV/DBS Control Release CATV/DBSRelease Audio Press and hold Audio Press DVDProblem Possible Cause Solution TroubleshootingProblem Video SpecificationsAmplifier AudioGeneral Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF AM tunerElectric shock