JVC RX-7020VBK Basic Operations, Listening Only with Headphones, Changing the Display Brightness

Page 14

Basic Operations

Listening Only with Headphones

You must turn off both pairs of speakers when you listen with headphones.

1Connect a pair of headphones to the PHONES jack on the front panel.

2Press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2 so that neither the SPK 1 nor SPK 2 indicator appears on the display.

•“HEADPHONE” appears and H. PHONE indicator lights up on the display.

ANALOG

L

R

H.PHONE

This cancels the Surround modes currently selected, and activates the HEADPHONE mode (see below).

HEADPHONE mode

When using the headphones, following signals are output regardless of your speaker setting:

—For 2 channel sources, the front left, right channel signals are output directly from the headphones.

—For multichannel sources, the front left and right, center, and rear channel signals are down-mixed and then output from the headphones.

You can enjoy multichannel sound sources using the headphones.

Notes:

•While in the HEADPHONE mode, you cannot use any Surround modes (see page 23).

•Activating the speakers cancel the HEADPHONE mode and turns on the Surround modes previously selected.

CAUTION:

Be sure to turn down the volume

•Before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.

•Before turning on speakers again, as high volume may output from the speakers.

Changing the Display Brightness

You can dim the display.

Press DIMMER on the remote control.

DIMMER

 

• Each time you press the button, the display dims and

 

brightens alternately.

 

Turning Off the Power

with the Sleep Timer

You can fall asleep while listening to music—Sleep Timer.

Press SLEEP on the remote control repeatedly.

SLEEP

 

•The SLEEP indicator lights up on the display, and the shut-off time changes in 10 minutes intervals.

ANALOG

SPK 1

SLEEP

 

L

C

R

 

S.WFR LFE

 

LS

S

RS

 

 

CH-

 

 

 

 

10 20 30 40 50 60

0(Canceled) 90 80 70

When the shut-off time comes

The receiver turns off automatically.

To check or change the remaining time until the shut-off time

Press SLEEP once.

The remaining time (in minutes) until the shut-off time appears.

•To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer

Press SLEEP repeatedly until “SLEEP 0 MIN” appears on the display. (The SLEEP indicator goes off.)

•Turning off the power also cancels the Sleep Timer.

Turning Off the Sounds

Temporarily—Muting

You can turn off the volume temporarily.

MUTING

Press MUTING on the remote control to mute the sound through all speakers and headphones connected.

•“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

ANALOG

SPK 1

 

L

C

R

 

S.WFR LFE

 

LS

S

RS

 

 

 

CH-

 

 

 

 

To restore the sound, press MUTING again.

•Turning MASTER VOLUME on the front panel or pressing VOLUME +/– on the remote control also restores the sound.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RX-7020VBK Mises en garde, précautions et indications diverses For Canada/pour le CanadaTable of Contents Front Panel Remote ControlParts Identification See pages in the parentheses for detailsGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverAM antenna connection Connecting the FM and AM AntennasGetting Started FM antenna connectionConnecting the front speakers Connecting the SpeakersSpeaker layout diagram Connection diagramConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsCD player VCRDVD player When you connect the DVD player with stereo output jacksTV and/or DBS tuner DVD player DBS tuner BDigital connections Connecting the Power CordPlug the power cord into an AC outlet Digital output terminalBasic Operations Turning On the PowerTo turn off the power into standby mode Selecting the Source to PlayAdjusting the Volume Basic Operations Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Changing the Display BrightnessSignal indicators Speaker indicators Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenDigital in Terminals Basic SettingsSetting the Digital Input Selecting the Analog or Digital Input Mode Basic Settings Setting the Speaker Information RemoteSelect the appropriate speaker distance Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Speaker sizeTo select the appropriate compression Press Setting repeatedly until LFE T SettingSelect the low frequency effect attenuator level LevelOutput Balance Sound AdjustmentsAdjusting the Front Speakers Adjusting the Subwoofer Output Level Sound AdjustmentsAdjusting the Tone Reinforcing the BassPress FM/AM Preset 5/∞ to Tuning in Stations ManuallyUsing Preset Tuning Tuner OperationsSelecting the FM Reception Mode Tuner OperationsDTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields Selecting the Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Available Surround modesSource you like to listen and start playing Activate Surround modeIf you like to adjust sound, go to step Press Surround ON/OFF toEqual level Adjust the speaker output levels -10 to +10Press Test to check if you can hear Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Only for DAP modes Adjust the effect level Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode PAVILION-or ALL CH Stereo appears on the displayPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Following indications appears On the displayAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection CaseOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound AdjustmentEx. When you press CD Operating Audio ComponentsTurntable CD playerCD changer Cassette deckDVD player Operating JVC’s Audio/Video ComponentsOperating Video Components You can always perform the following operationsTry to operate your TV by pressing TV To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment OperatingTry to operate your VCR by pressing To change the transmittable signals for operating a VCROperating Other Manufacturers’ Video Equipment Manufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingManufacturers’ codes for VCR Codes Troubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner SpecificationsFM tuner IHF GeneralAuthorized Service Centers Limited Warranty 1201NHMMDWJEIN

RX-7020VBK specifications

The JVC RX-7020VBK is a versatile and powerful audio receiver designed to provide an immersive sound experience for home theater enthusiasts and casual listeners alike. This 5.1-channel receiver supports various audio formats and delivers high-quality sound that complements any entertainment setup. One of the standout features of the RX-7020VBK is its impressive power output. With 100 watts per channel, this receiver ensures that your audio fills the room with rich and dynamic sound. It is perfect for movies, music, and gaming, allowing every detail to come to life.

In terms of connectivity, the JVC RX-7020VBK offers multiple input options, including HDMI, digital optical, coaxial, and analog inputs. This wide range of connectivity options allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, making it a versatile choice for any home entertainment system. The receiver also includes AM/FM radio capabilities, giving users access to a variety of listening options.

The RX-7020VBK is equipped with Dolby Digital and DTS surround sound technologies, providing a surround sound experience that enhances movie watching and gaming. These technologies allow for precise sound placement, giving users a realistic audio experience that draws them into the action. Furthermore, the receiver includes a built-in equalizer, offering users the ability to customize their audio settings according to their preferences.

Another noteworthy feature of the JVC RX-7020VBK is its user-friendly interface. The receiver comes with an intuitive remote control that allows for easy navigation through menus and settings, making it accessible for all users, regardless of their technical expertise. Additionally, the receiver has a sleek and modern design that blends seamlessly with any home décor.

The JVC RX-7020VBK also incorporates advanced protection circuits to safeguard against damage from overheating and overloads, ensuring longevity and reliability. With its combination of power, versatility, and user-friendly features, the JVC RX-7020VBK stands out as an excellent choice for those looking to elevate their audio experience at home. Its balance of performance and technological advancements makes it suitable for both dedicated audiophiles and casual users alike.
Top Page Image Contents