JVC RX-7020VBK Connecting the Speakers, Speaker layout diagram, Connecting the front speakers

Page 7

“NO” for the subwoofer, “LARGE” for the front speakers, and “SMALL” for the center and rear speakers are initial settings. To get best possible sound, change the subwoofer and speaker settings to fit your listening conditions.

Connecting the Speakers

Speaker layout diagram

Center speaker

Left front

Right front

speaker

Subwoofer speaker

Left rear

Right rear

speaker

speaker

After connecting the front, center, rear speakers and/or subwoofer, set the speaker setting information properly to obtain the best possible Surround effects. For details, see pages 16 to 18.

CAUTION:

Use speakers with the SPEAKER IMPEDANCE indicated by the

speaker terminals.

Connecting the front speakers

You can connect two pairs of front speakers (one pair to the FRONT SPEAKERS 1 terminals, and the other pair to the FRONT SPEAKERS 2 terminals).

About the speaker impedance

The required speaker impedance of the front speakers does differ depending on whether both the FRONT SPEAKERS 1and FRONT SPEAKERS 2 terminals are used or only one of them is used.

CASE 1 When you connect only one pair of front speakers

Front

Front

speaker

speaker

1

1

Use front speakers with 8 Ω – 16 Ω impedance.

CASE 2 When you connect two pairs of front speakers

FrontFront

speaker speaker

2

2

Front

Front

speaker

speaker

1

1

Use front speakers with 16 Ω – 32 Ω impedance.

Connection diagram

FRONT

SPEAKERS

1

1

FRONT

2

SPEAKERS

 

+

+

 

–

–

 

RIGHT

LEFT

RIGHT

LEFT

 

FRONT

SPEAKERS

2

Connecting speakers to the FRONT SPEAKERS 1 terminals

1

2

3

4

 

1

1

1

 

RIGHT

RIGHT

RIGHT

For each speaker , connect the (+) and (–) terminals on the rear panel to the (+) and (–) terminals marked on the speakers.

1Cut, twist and remove the insulation at the end of each speaker signal cable (not supplied).

2Turn the knob counterclockwise.

3Insert the speaker signal cable.

4Turn the knob clockwise.

Connecting speakers to the FRONT SPEAKERS 2 terminals

1

2

3

1

2

For each speaker, connect the (+) and (–) terminals on the rear panel to the (+) and (–) terminals marked on the speakers.

1Cut, twist and remove the insulation at the end of each speaker cord.

2Open the terminal (1), then insert the speaker cord (2).

3Close the terminal.

Getting Started

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents RX-7020VBK For Canada/pour le Canada Mises en garde, précautions et indications diversesTable of Contents See pages in the parentheses for details Remote ControlParts Identification Front PanelReplace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedFM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionConnection diagram Connecting the SpeakersSpeaker layout diagram Connecting the front speakersAnalog connections Audio component connections Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVCR Video component connectionsCD player Cassette deck or CD recorderDBS tuner B When you connect the DVD player with stereo output jacksTV and/or DBS tuner DVD player DVD playerDigital output terminal Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsSelecting the Source to Play Turning On the PowerTo turn off the power into standby mode Basic OperationsAdjusting the Volume Changing the Display Brightness Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Basic OperationsSpeaker indicators light up when Basic adjustment auto memorySignal and speaker indicators on the display Signal indicators Speaker indicatorsSetting the Digital Input Basic SettingsDigital in Terminals Selecting the Analog or Digital Input Mode Setting the Speaker Information Remote Basic SettingsSpeaker size Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Select the appropriate speaker distanceLevel Press Setting repeatedly until LFE T SettingSelect the low frequency effect attenuator level To select the appropriate compressionAdjusting the Front Speakers Sound AdjustmentsOutput Balance Reinforcing the Bass Sound AdjustmentsAdjusting the Tone Adjusting the Subwoofer Output LevelTuner Operations Tuning in Stations ManuallyUsing Preset Tuning Press FM/AM Preset 5/∞ toTuner Operations Selecting the FM Reception ModeTypical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundCreating Realistic Sound Fields Available Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Selecting the Surround modesPress Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Source you like to listen and start playingPress Test again to stop the test tone Adjust the speaker output levels -10 to +10Press Test to check if you can hear Equal levelUsing DAP Modes and All Channel Stereo PAVILION-or ALL CH Stereo appears on the display Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode Only for DAP modes Adjust the effect levelFollowing indications appears On the display Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Press DVD MultiSynchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionCase AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionsOne-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayOperating Audio Components Sound AdjustmentEx. When you press CD Operating JVC’s Audio/Video ComponentsCassette deck CD playerCD changer TurntableYou can always perform the following operations Operating JVC’s Audio/Video ComponentsOperating Video Components DVD playerOperating To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressing TVOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a VCRTry to operate your VCR by pressing Manufacturers’ codes for VCR Codes Try to operate your DVD player by pressingManufacturers’ codes for DVD player Codes Problem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalGeneral SpecificationsFM tuner IHF AM tunerAuthorized Service Centers Limited Warranty 1201NHMMDWJEIN

RX-7020VBK specifications

The JVC RX-7020VBK is a versatile and powerful audio receiver designed to provide an immersive sound experience for home theater enthusiasts and casual listeners alike. This 5.1-channel receiver supports various audio formats and delivers high-quality sound that complements any entertainment setup. One of the standout features of the RX-7020VBK is its impressive power output. With 100 watts per channel, this receiver ensures that your audio fills the room with rich and dynamic sound. It is perfect for movies, music, and gaming, allowing every detail to come to life.

In terms of connectivity, the JVC RX-7020VBK offers multiple input options, including HDMI, digital optical, coaxial, and analog inputs. This wide range of connectivity options allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, making it a versatile choice for any home entertainment system. The receiver also includes AM/FM radio capabilities, giving users access to a variety of listening options.

The RX-7020VBK is equipped with Dolby Digital and DTS surround sound technologies, providing a surround sound experience that enhances movie watching and gaming. These technologies allow for precise sound placement, giving users a realistic audio experience that draws them into the action. Furthermore, the receiver includes a built-in equalizer, offering users the ability to customize their audio settings according to their preferences.

Another noteworthy feature of the JVC RX-7020VBK is its user-friendly interface. The receiver comes with an intuitive remote control that allows for easy navigation through menus and settings, making it accessible for all users, regardless of their technical expertise. Additionally, the receiver has a sleek and modern design that blends seamlessly with any home décor.

The JVC RX-7020VBK also incorporates advanced protection circuits to safeguard against damage from overheating and overloads, ensuring longevity and reliability. With its combination of power, versatility, and user-friendly features, the JVC RX-7020VBK stands out as an excellent choice for those looking to elevate their audio experience at home. Its balance of performance and technological advancements makes it suitable for both dedicated audiophiles and casual users alike.
Top Page Image Contents