JVC RX-7020VBK AV Compu Link Remote Control System, Connections 1 AV Compu Link Connection, Case

Page 34

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player) through the receiver.

This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC’s video components through the video components terminals. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedure on the next page.

CONNECTIONS 1: AV COMPU LINK Connection

VCR

DVD player

TV

VHS

DVD

AV

COMPU LINK – III

AV

COMPU LINK

AV

COMPU LINK

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV SOUND/DBS and DBS component video terminals.

AV COMPU LINK EX

AV

COMPU LINK III

Note:

You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK III terminal. The TV with AV COMPU LINK RECEIVER/AMP terminal will not be used.

Notes:

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic Selection of TV’s Input Mode (see page 33).

•When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.

•Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”

•Refer also to the manuals supplied with your video components.

CONNECTIONS 2: Video Cable Connections

This receiver is equipped with three types of video terminals — S-video, composite video, and component video, and the signals coming into this receiver through one type of video terminal can output only through the same type of the terminal. So you need to connect the VCR and/ or DVD player to the TV using one of the following three ways:

CASE 1

 

When connecting the source equipment to the receiver using the S-video terminals, connect also this

 

 

receiver to the TV’s Video Input 1 terminal using S-video cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

RX-7020VBK

 

 

 

 

TV

 

 

 

 

Equipment

S-video cable

 

S-video cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

To Video Input 1

 

 

If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input

 

 

terminal setting to “S/C” (see page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CASE 2

 

When connecting the source equipment to the receiver using the composite video terminals, connect also

 

 

this receiver to the TV’s Video Input 2 terminal (composite video input) using composite video cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

 

RX-7020VBK

 

 

 

 

TV

 

 

 

 

Equipment

 

Composite

 

 

Composite

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

video cable

 

 

 

video cable

 

 

 

 

 

Note:

 

 

 

 

 

To Video Input 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Composite)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video

 

 

input terminal setting to “S/C” (see page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CASE 3

 

When connecting the source equipment to the receiver using the component video terminals, connect also

 

 

this receiver to the TV’s Video Input 2 terminals (component video input) using component video cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

 

 

 

 

RX-7020VBK

 

 

 

 

TV

 

 

 

 

Equipment

 

Component

 

 

 

Component

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

video cable

 

 

 

video cable

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

To Video Input 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Component)

 

 

If you connect the DVD player and the DBS tuner to this receiver using the component video terminals, change the

 

 

video input terminal setting to “COMPONENT” (see page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents RX-7020VBK Mises en garde, précautions et indications diverses For Canada/pour le CanadaTable of Contents Front Panel Remote ControlParts Identification See pages in the parentheses for detailsGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverAM antenna connection Connecting the FM and AM AntennasGetting Started FM antenna connectionConnecting the front speakers Connecting the SpeakersSpeaker layout diagram Connection diagramConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connections Audio component connectionsCassette deck or CD recorder Video component connectionsCD player VCRDVD player When you connect the DVD player with stereo output jacksTV and/or DBS tuner DVD player DBS tuner BDigital connections Connecting the Power CordPlug the power cord into an AC outlet Digital output terminalBasic Operations Turning On the PowerTo turn off the power into standby mode Selecting the Source to PlayAdjusting the Volume Basic Operations Listening Only with HeadphonesTurning Off the Power With the Sleep Timer Changing the Display BrightnessSignal indicators Speaker indicators Basic adjustment auto memorySignal and speaker indicators on the display Speaker indicators light up whenSetting the Digital Input Basic SettingsDigital in Terminals Selecting the Analog or Digital Input Mode Basic Settings Setting the Speaker Information RemoteSelect the appropriate speaker distance Unit with the current setting Appears on the displayPress Control UP 5/DOWN ∞ to select the unit Speaker sizeTo select the appropriate compression Press Setting repeatedly until LFE T SettingSelect the low frequency effect attenuator level LevelAdjusting the Front Speakers Sound AdjustmentsOutput Balance Adjusting the Subwoofer Output Level Sound AdjustmentsAdjusting the Tone Reinforcing the BassPress FM/AM Preset 5/∞ to Tuning in Stations ManuallyUsing Preset Tuning Tuner OperationsSelecting the FM Reception Mode Tuner OperationsDTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields Selecting the Surround modes About Relations between Speaker Layouts and Surround ModesTurning on or off the Surround modes Available Surround modesSource you like to listen and start playing Activate Surround modeIf you like to adjust sound, go to step Press Surround ON/OFF toEqual level Adjust the speaker output levels -10 to +10Press Test to check if you can hear Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Only for DAP modes Adjust the effect level Press Surround ON/OFF to activate Surround modePress Surround Mode repeatedly Surround Mode PAVILION-or ALL CH Stereo appears on the displayPress DVD Multi Using DVD Multi Playback ModeActivating DVD Multi Playback Mode Following indications appears On the displayAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingConnections 2 Video Cable Connections AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection CaseOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound AdjustmentEx. When you press CD Operating Audio ComponentsTurntable CD playerCD changer Cassette deckDVD player Operating JVC’s Audio/Video ComponentsOperating Video Components You can always perform the following operationsTry to operate your TV by pressing TV To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment OperatingOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a VCRTry to operate your VCR by pressing Manufacturers’ codes for VCR Codes Try to operate your DVD player by pressingManufacturers’ codes for DVD player Codes Troubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner SpecificationsFM tuner IHF GeneralAuthorized Service Centers Limited Warranty 1201NHMMDWJEIN

RX-7020VBK specifications

The JVC RX-7020VBK is a versatile and powerful audio receiver designed to provide an immersive sound experience for home theater enthusiasts and casual listeners alike. This 5.1-channel receiver supports various audio formats and delivers high-quality sound that complements any entertainment setup. One of the standout features of the RX-7020VBK is its impressive power output. With 100 watts per channel, this receiver ensures that your audio fills the room with rich and dynamic sound. It is perfect for movies, music, and gaming, allowing every detail to come to life.

In terms of connectivity, the JVC RX-7020VBK offers multiple input options, including HDMI, digital optical, coaxial, and analog inputs. This wide range of connectivity options allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, making it a versatile choice for any home entertainment system. The receiver also includes AM/FM radio capabilities, giving users access to a variety of listening options.

The RX-7020VBK is equipped with Dolby Digital and DTS surround sound technologies, providing a surround sound experience that enhances movie watching and gaming. These technologies allow for precise sound placement, giving users a realistic audio experience that draws them into the action. Furthermore, the receiver includes a built-in equalizer, offering users the ability to customize their audio settings according to their preferences.

Another noteworthy feature of the JVC RX-7020VBK is its user-friendly interface. The receiver comes with an intuitive remote control that allows for easy navigation through menus and settings, making it accessible for all users, regardless of their technical expertise. Additionally, the receiver has a sleek and modern design that blends seamlessly with any home décor.

The JVC RX-7020VBK also incorporates advanced protection circuits to safeguard against damage from overheating and overloads, ensuring longevity and reliability. With its combination of power, versatility, and user-friendly features, the JVC RX-7020VBK stands out as an excellent choice for those looking to elevate their audio experience at home. Its balance of performance and technological advancements makes it suitable for both dedicated audiophiles and casual users alike.
Top Page Image Contents