JVC RX-7020VBK manual Video component connections, CD player, Cassette deck or CD recorder, Vcr

Page 9

CD player

CD player

To audio output

PHONO

CD

OUT

(REC)

TAPE

CDR

IN

(PLAY)

OUT

(REC)

VCR

IN

(PLAY)

TV

SOUND

DBS

RIGHT LEFT

AUDIO

Video component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.

•If video components have S-video (Y/C-separation) and/or component video (Y, PB/CB, PR/CR) terminals, connect them using an S-video cable (not supplied) and/or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order — Component video > S-video > Composite video.

IMPORTANT:

This unit is equipped with the following video terminals ; composite video, S-video and component video terminals. You can use any of these three to connect a video component.

However, remember that the video signals from one type of these input terminals are output only through the video output terminals of the same type.

Getting Started

Cassette deck or CD recorder

Cassette deck

To audio input

PHONO

CD

OUT

(REC)

TAPE

CDR

IN

(PLAY)

OUT

(REC)

VCR

To audio output

Therefore, if a recording video component and a playing video component are connected to the unit through the different types of video terminals, you cannot record the picture from the playing component onto the recording component. In addition, if the TV and a playing video component are connected to the unit through the different types of video terminals, you cannot view the playback picture from the playing component on the TV.

VCR

S-VHS (or VHS) VCR

C

D

A

 

 

B

E

F

 

IN

(PLAY)

TV

SOUND

DBS

RIGHT LEFT

AUDIO

PHONO

 

 

CD

 

 

OUT

AUDIO

(REC)

 

 

TAPE

RIGHT

LEFT

CDR

FRONT

 

IN

 

(PLAY)

 

DVD

 

 

MONITOR

OUT

DVD

To audio input

CD recorder

To audio output

 

 

Note:

You can connect either a cassette deck or a CD recorder to the TAPE/ CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks, change the source name, which will be shown on the display when selected as the source. See page 11 for details.

OUT

 

SUB

CENTER

(REC)

 

 

 

WOOFER

 

VCR

 

REAR

 

 

 

 

IN

 

 

 

(PLAY)

 

RIGHT

LEFT

 

 

TV

 

 

 

SOUND

 

 

 

DBS

 

 

 

RIGHT

LEFT

SUBWOOFER

VIDEO

AUDIO

OUT

 

OUT

(REC)

VCR

IN

(PLAY)

DBS

VIDEO S-VIDEO

If your audio components have a COMPU LINK jack

See also page 31 for detailed information about the connection and the COMPU LINK remote control system.

ÅTo left/right channel audio output ı To left/right channel audio input Ç To composite video output

Î To S-video output ‰ To S-video input

Ï To composite video input

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RX-7020VBK For Canada/pour le Canada Mises en garde, précautions et indications diversesTable of Contents Parts Identification Remote ControlFront Panel See pages in the parentheses for detailsChecking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverGetting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionSpeaker layout diagram Connecting the SpeakersConnecting the front speakers Connection diagramConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connections Audio component connectionsCD player Video component connectionsCassette deck or CD recorder VCRTV and/or DBS tuner DVD player When you connect the DVD player with stereo output jacksDVD player DBS tuner BPlug the power cord into an AC outlet Connecting the Power CordDigital connections Digital output terminalTo turn off the power into standby mode Turning On the PowerBasic Operations Selecting the Source to PlayAdjusting the Volume Turning Off the Power With the Sleep Timer Listening Only with HeadphonesBasic Operations Changing the Display BrightnessSignal and speaker indicators on the display Basic adjustment auto memorySignal indicators Speaker indicators Speaker indicators light up whenBasic Settings Setting the Digital InputDigital in Terminals Selecting the Analog or Digital Input Mode Setting the Speaker Information Remote Basic SettingsPress Control UP 5/DOWN ∞ to select the unit Unit with the current setting Appears on the displaySelect the appropriate speaker distance Speaker sizeSelect the low frequency effect attenuator level Press Setting repeatedly until LFE T SettingTo select the appropriate compression LevelSound Adjustments Adjusting the Front SpeakersOutput Balance Adjusting the Tone Sound AdjustmentsAdjusting the Subwoofer Output Level Reinforcing the BassUsing Preset Tuning Tuning in Stations ManuallyPress FM/AM Preset 5/∞ to Tuner OperationsTuner Operations Selecting the FM Reception ModeDolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields Turning on or off the Surround modes About Relations between Speaker Layouts and Surround ModesSelecting the Surround modes Available Surround modesIf you like to adjust sound, go to step Activate Surround modeSource you like to listen and start playing Press Surround ON/OFF toPress Test to check if you can hear Adjust the speaker output levels -10 to +10Equal level Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround Mode repeatedly Surround Mode Press Surround ON/OFF to activate Surround modeOnly for DAP modes Adjust the effect level PAVILION-or ALL CH Stereo appears on the displayActivating DVD Multi Playback Mode Using DVD Multi Playback ModePress DVD Multi Following indications appears On the displayPress the play 3 button on the CD player Compu Link Remote Control SystemAutomatic Source Selection Synchronized RecordingConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connections CaseAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayEx. When you press CD Sound AdjustmentOperating JVC’s Audio/Video Components Operating Audio ComponentsCD changer CD playerTurntable Cassette deckOperating Video Components Operating JVC’s Audio/Video ComponentsDVD player You can always perform the following operationsOperating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVTry to operate your TV by pressing TV OperatingTo change the transmittable signals for operating a VCR Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing Try to operate your DVD player by pressing Manufacturers’ codes for VCR CodesManufacturers’ codes for DVD player Codes Problem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF SpecificationsAM tuner GeneralAuthorized Service Centers Limited Warranty 1201NHMMDWJEIN

RX-7020VBK specifications

The JVC RX-7020VBK is a versatile and powerful audio receiver designed to provide an immersive sound experience for home theater enthusiasts and casual listeners alike. This 5.1-channel receiver supports various audio formats and delivers high-quality sound that complements any entertainment setup. One of the standout features of the RX-7020VBK is its impressive power output. With 100 watts per channel, this receiver ensures that your audio fills the room with rich and dynamic sound. It is perfect for movies, music, and gaming, allowing every detail to come to life.

In terms of connectivity, the JVC RX-7020VBK offers multiple input options, including HDMI, digital optical, coaxial, and analog inputs. This wide range of connectivity options allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, making it a versatile choice for any home entertainment system. The receiver also includes AM/FM radio capabilities, giving users access to a variety of listening options.

The RX-7020VBK is equipped with Dolby Digital and DTS surround sound technologies, providing a surround sound experience that enhances movie watching and gaming. These technologies allow for precise sound placement, giving users a realistic audio experience that draws them into the action. Furthermore, the receiver includes a built-in equalizer, offering users the ability to customize their audio settings according to their preferences.

Another noteworthy feature of the JVC RX-7020VBK is its user-friendly interface. The receiver comes with an intuitive remote control that allows for easy navigation through menus and settings, making it accessible for all users, regardless of their technical expertise. Additionally, the receiver has a sleek and modern design that blends seamlessly with any home décor.

The JVC RX-7020VBK also incorporates advanced protection circuits to safeguard against damage from overheating and overloads, ensuring longevity and reliability. With its combination of power, versatility, and user-friendly features, the JVC RX-7020VBK stands out as an excellent choice for those looking to elevate their audio experience at home. Its balance of performance and technological advancements makes it suitable for both dedicated audiophiles and casual users alike.
Top Page Image Contents