JVC RX-7020VBK Using DVD Multi Playback Mode, Activating DVD Multi Playback Mode, Press DVD Multi

Page 32

Using DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

Activating DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the adjustments until you change them.

You also need to set the DVD player to the analog discrete output mode.

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:

 

1 Press DVD MULTI.

DVD MULTI

From the remote control:

1 Press DVD MULTI.

DVD MULTI

 

Note:

When you select “DVD MULTI” as the source to play, Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

•Refer also to the manual supplied with the DVD player.

If you need to make any adjustments, go to the following steps.

3 Press SOUND.

SOUND

The 10 keys are activated for adjusting the sound.

4Adjust the speaker output levels.

– CENTER+

Notes:

•When you select “DVD MULTI” as the source to play, the Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

•If you select the source to DVD MULTI while using both the speakers connected to the FRONT SPEAKERS 1 and 2 terminals, the speakers connected to the FRONT SPEAKERS

2 terminals are deactivated.

•When selecting “DVD MULTI” as the source, you can only select either the speakers connected to the FRONT SPEAKERS 1 or 2 terminals.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

•Refer also to the manual supplied with the DVD player.

If you need to make any adjustments, go to the following steps.

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one

ADJUST SETTING

 

of the following indications appears

 

on the display:

 

CENTER :To adjust the center speaker output level (–10 dB to +10 dB).

REAR L : To adjust the left rear speaker output level (–10 dB to +10 dB).

REAR R : To adjust the right rear speaker output level (–10 dB to +10 dB).

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to adjust the selected speaker output levels.

3)Repeat steps 1) and 2) to adjust the other speaker output levels.

•To adjust the center speaker level, press CENTER +/– (–10 to +10).

•To adjust the left rear speaker level, press REAR•L +/– (–10 to +10).

•To adjust the right rear speaker level, press REAR•R +/– (–10 to +10).

2 3

MENU

–REAR• L+

5 6

ENTER

ENTER

–REAR• R+

8 9

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents RX-7020VBK Mises en garde, précautions et indications diverses For Canada/pour le CanadaTable of Contents Remote Control Parts IdentificationFront Panel See pages in the parentheses for detailsBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverConnecting the FM and AM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers Speaker layout diagramConnecting the front speakers Connection diagramConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker Analog connections Audio component connectionsVideo component connections CD playerCassette deck or CD recorder VCRWhen you connect the DVD player with stereo output jacks TV and/or DBS tuner DVD playerDVD player DBS tuner BConnecting the Power Cord Plug the power cord into an AC outletDigital connections Digital output terminalTurning On the Power To turn off the power into standby modeBasic Operations Selecting the Source to PlayAdjusting the Volume Listening Only with Headphones Turning Off the Power With the Sleep TimerBasic Operations Changing the Display BrightnessBasic adjustment auto memory Signal and speaker indicators on the displaySignal indicators Speaker indicators Speaker indicators light up whenDigital in Terminals Basic SettingsSetting the Digital Input Selecting the Analog or Digital Input Mode Basic Settings Setting the Speaker Information RemoteUnit with the current setting Appears on the display Press Control UP 5/DOWN ∞ to select the unitSelect the appropriate speaker distance Speaker sizePress Setting repeatedly until LFE T Setting Select the low frequency effect attenuator levelTo select the appropriate compression LevelOutput Balance Sound AdjustmentsAdjusting the Front Speakers Sound Adjustments Adjusting the ToneAdjusting the Subwoofer Output Level Reinforcing the BassTuning in Stations Manually Using Preset TuningPress FM/AM Preset 5/∞ to Tuner OperationsSelecting the FM Reception Mode Tuner OperationsCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionCreating Realistic Sound Fields About Relations between Speaker Layouts and Surround Modes Turning on or off the Surround modesSelecting the Surround modes Available Surround modesActivate Surround mode If you like to adjust sound, go to stepSource you like to listen and start playing Press Surround ON/OFF toAdjust the speaker output levels -10 to +10 Press Test to check if you can hearEqual level Press Test again to stop the test toneUsing DAP Modes and All Channel Stereo Press Surround ON/OFF to activate Surround mode Press Surround Mode repeatedly Surround ModeOnly for DAP modes Adjust the effect level PAVILION-or ALL CH Stereo appears on the displayUsing DVD Multi Playback Mode Activating DVD Multi Playback ModePress DVD Multi Following indications appears On the displayCompu Link Remote Control System Press the play 3 button on the CD playerAutomatic Source Selection Synchronized RecordingAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connections CaseAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlaySound Adjustment Ex. When you press CDOperating JVC’s Audio/Video Components Operating Audio ComponentsCD player CD changerTurntable Cassette deckOperating JVC’s Audio/Video Components Operating Video ComponentsDVD player You can always perform the following operationsTo change the transmittable signals for operating a TV Operating Other Manufacturers’ Video EquipmentTry to operate your TV by pressing TV OperatingTry to operate your VCR by pressing To change the transmittable signals for operating a VCROperating Other Manufacturers’ Video Equipment Manufacturers’ codes for DVD player Codes Try to operate your DVD player by pressingManufacturers’ codes for VCR Codes Troubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionSpecifications FM tuner IHFAM tuner GeneralAuthorized Service Centers Limited Warranty 1201NHMMDWJEIN

RX-7020VBK specifications

The JVC RX-7020VBK is a versatile and powerful audio receiver designed to provide an immersive sound experience for home theater enthusiasts and casual listeners alike. This 5.1-channel receiver supports various audio formats and delivers high-quality sound that complements any entertainment setup. One of the standout features of the RX-7020VBK is its impressive power output. With 100 watts per channel, this receiver ensures that your audio fills the room with rich and dynamic sound. It is perfect for movies, music, and gaming, allowing every detail to come to life.

In terms of connectivity, the JVC RX-7020VBK offers multiple input options, including HDMI, digital optical, coaxial, and analog inputs. This wide range of connectivity options allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, making it a versatile choice for any home entertainment system. The receiver also includes AM/FM radio capabilities, giving users access to a variety of listening options.

The RX-7020VBK is equipped with Dolby Digital and DTS surround sound technologies, providing a surround sound experience that enhances movie watching and gaming. These technologies allow for precise sound placement, giving users a realistic audio experience that draws them into the action. Furthermore, the receiver includes a built-in equalizer, offering users the ability to customize their audio settings according to their preferences.

Another noteworthy feature of the JVC RX-7020VBK is its user-friendly interface. The receiver comes with an intuitive remote control that allows for easy navigation through menus and settings, making it accessible for all users, regardless of their technical expertise. Additionally, the receiver has a sleek and modern design that blends seamlessly with any home décor.

The JVC RX-7020VBK also incorporates advanced protection circuits to safeguard against damage from overheating and overloads, ensuring longevity and reliability. With its combination of power, versatility, and user-friendly features, the JVC RX-7020VBK stands out as an excellent choice for those looking to elevate their audio experience at home. Its balance of performance and technological advancements makes it suitable for both dedicated audiophiles and casual users alike.
Top Page Image Contents