Fisher-Price 73535 owner manual Shown Actual Size

Page 10

Assembly

10

Spacer

Spacer

Front Wheel

• Fit a spacer into the hole on each side of the front wheel.

11

Front Fork

Ends

Front Wheel

Axle

•Fit the front wheel (with spacers inserted) between the ends of the front fork.

•Insert the axle through one side of the front fork, the front wheel and out through the other side of the front fork.

12

9/16" Lock Nut - 2

SHOWN ACTUAL SIZE

•Attach the 9/16" lock nut to the end of the axle. While holding the lock nut with an adjustable wrench, tighten the axle with a 9/16" wrench (or another adjustable wrench). Do not over-tighten.

13

PULL

PULL

•Check to be sure the wheel is secure on the front fork. Pull the wheel down. It should not move. If it does move, tighten the axle a few more turns with the 9/16" wrench (or another adjustable wrench).

IMPORTANT! Assembly is now complete, but you must adjust the hand brake before first time use. Please

10 proceed to the section Adjusting the Brake, page 11.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents With Assembly Instructions Table of Contents Important InformationElectrical Hazard Parts Part Not Shown Label SheetBattery Charging About Thermal FusesBattery Charging Assembly Shown Actual SizeBoth Shown Actual Size Repeat steps 8 and 9 to fasten the other foot peg to Shown Actual Size Adjusting the Brake Adjust BrakeAdjusting the Brakes Label Decoration Battery Installation PushBattery Care and Disposal CareTeach Safety Rules to Children Rules for Safe RidingHow to Operate Your Mini-Bike Caring For Your Mini-Bike Problems and Solutions Guide Problem Possible Cause SolutionProblems and Solutions Guide Warm during use and is not reason Limited Warranty Authorized Service Centers AlabamaMontana Oregon Utah Page Do not Return your Mini-Bike to the Store
Top Page Image Contents